A general point: please have me in the To: line rather than the Cc: line so that I can find emails better; I've just spent quite a while trying to find this series you posted last night amongst all the other emails that I'm Cc'd on.
(The difference between To: and Cc: is that you expect those in the To: header to be the primary recipients who you expect action from, and those in the Cc: to be secondary recipients for information.) https://blog.thedigitalgroup.com/to-vs-cc-vs-bcc-how-to-use-them-correctly https://www.writebetteremails.com/to-cc.htm https://thinkproductive.co.uk/email-using-cc-bcc-to/ ... etc ... Thanks. On Thu, Oct 29, 2020 at 11:25:04PM +0100, Marek Behún wrote: > Hello, > > this is v2 of series adding support for RollBall/Hilink SFP modules. > > Checked with: > checkpatch.pl --max-line-length=80 > > Changes from v1: > - wrapped to 80 columns as per Russell's request > - initialization of RollBall MDIO I2C protocol moved from sfp.c to > mdio-i2c.c as per Russell's request > - second patch removes the 802.3z check also from phylink_sfp_config > as suggested by Russell > - creation/destruction of mdiobus for SFP now occurs before probing > for PHY/after releasing PHY (as suggested by Russell) > - the last patch became a little simpler after the above was done > > Cc: Andrew Lunn <and...@lunn.ch> > Cc: Russell King <rmk+ker...@armlinux.org.uk> > > Marek Behún (5): > net: phy: mdio-i2c: support I2C MDIO protocol for RollBall SFP modules > net: phylink: allow attaching phy for SFP modules on 802.3z mode > net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY > release > net: phy: marvell10g: change MACTYPE if underlying MAC does not > support it > net: sfp: add support for multigig RollBall transceivers > > drivers/net/mdio/mdio-i2c.c | 232 +++++++++++++++++++++++++++++++++- > drivers/net/phy/marvell10g.c | 31 +++++ > drivers/net/phy/phylink.c | 5 +- > drivers/net/phy/sfp.c | 67 ++++++++-- > include/linux/mdio/mdio-i2c.h | 8 +- > 5 files changed, 322 insertions(+), 21 deletions(-) > > > base-commit: cd29296fdfca919590e4004a7e4905544f4c4a32 > -- > 2.26.2 > > -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
