Hello The DP83TD510 is an Ethernet PHY supporting single pair of twisted wires. The PHY is capable of 10Mbps communication over long distances and exceeds the IEEE 802.3cg 10BASE-T1L single-pair Ethernet specification. The PHY supports various voltage level signalling and can be forced to support a specific voltage or allowed to perfrom auto negotiation on the voltage level. The default for the PHY is auto negotiation but if the PHY is forced to a specific voltage then the LP must also support the same voltage.
Dan Dan Murphy (2): dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY .../devicetree/bindings/net/ti,dp83td510.yaml | 70 +++ drivers/net/phy/Kconfig | 6 + drivers/net/phy/Makefile | 1 + drivers/net/phy/dp83td510.c | 583 ++++++++++++++++++ 4 files changed, 660 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml create mode 100644 drivers/net/phy/dp83td510.c -- 2.28.0.585.ge1cfff676549
