This series adds support for the ksz88x3 driver family to the dsa based ksz
drivers. The driver is making use of the already available ksz8795 driver and
moves it to an generic driver for the ksz8 based chips which have similar
functions but an totaly different register layout.
Andrew Lunn (1):
net: phy: Add support for microchip SMI0 MDIO bus
Michael Grzeschik (10):
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
net: tag: ksz: Add KSZ8863 tag code
net: dsa: microchip: ksz8795: use port_cnt where possible
net: dsa: microchip: ksz8795: dynamic allocate memory for
flush_dyn_mac_table
net: dsa: microchip: ksz8795: change drivers prefix to be generic
net: dsa: microchip: ksz8795: move register offsets and shifts to
separate struct
net: dsa: microchip: ksz8795: add support for ksz88xx chips
net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support
net: dsa: microchip: Add Microchip KSZ8863 SPI based driver support
dt-bindings: net: dsa: document additional Microchip KSZ8863/8873
switch
.../devicetree/bindings/net/dsa/ksz.txt | 2 +
.../devicetree/bindings/net/mdio-gpio.txt | 1 +
drivers/net/dsa/microchip/Kconfig | 9 +
drivers/net/dsa/microchip/Makefile | 1 +
drivers/net/dsa/microchip/ksz8.h | 68 ++
drivers/net/dsa/microchip/ksz8795.c | 926 ++++++++++++------
drivers/net/dsa/microchip/ksz8795_reg.h | 214 ++--
drivers/net/dsa/microchip/ksz8795_spi.c | 64 +-
drivers/net/dsa/microchip/ksz8863_reg.h | 124 +++
drivers/net/dsa/microchip/ksz8863_smi.c | 204 ++++
drivers/net/dsa/microchip/ksz_common.h | 2 +-
drivers/net/phy/mdio-bitbang.c | 8 +-
drivers/net/phy/mdio-gpio.c | 9 +
include/linux/mdio-bitbang.h | 3 +
include/net/dsa.h | 2 +
net/dsa/tag_ksz.c | 57 ++
16 files changed, 1275 insertions(+), 419 deletions(-)
create mode 100644 drivers/net/dsa/microchip/ksz8.h
create mode 100644 drivers/net/dsa/microchip/ksz8863_reg.h
create mode 100644 drivers/net/dsa/microchip/ksz8863_smi.c
--
2.28.0
