This patch adds defines for 10M and EEE 100M link modes, which are
supported by A2.
10M support is added in this patch series.
EEE is out of scope, but will be added in a follow-up series.
Signed-off-by: Igor Russkikh <irussk...@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoi...@marvell.com>
---
.../ethernet/aquantia/atlantic/aq_common.h | 22 ++++++++++---------
.../ethernet/aquantia/atlantic/aq_ethtool.c | 3 +++
.../net/ethernet/aquantia/atlantic/aq_nic.c | 12 ++++++++++
3 files changed, 27 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_common.h
b/drivers/net/ethernet/aquantia/atlantic/aq_common.h
index 1261e7c7a01e..53620ba6d7a6 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_common.h
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_common.h
@@ -50,16 +50,18 @@
#define AQ_HWREV_1 1
#define AQ_HWREV_2 2
-#define AQ_NIC_RATE_10G BIT(0)
-#define AQ_NIC_RATE_5G BIT(1)
-#define AQ_NIC_RATE_5GSR BIT(2)
-#define AQ_NIC_RATE_2GS BIT(3)
-#define AQ_NIC_RATE_1G BIT(4)
-#define AQ_NIC_RATE_100M BIT(5)
+#define AQ_NIC_RATE_10G BIT(0)
+#define AQ_NIC_RATE_5G BIT(1)
+#define AQ_NIC_RATE_5GSR BIT(2)
+#define AQ_NIC_RATE_2GS BIT(3)
+#define AQ_NIC_RATE_1G BIT(4)
+#define AQ_NIC_RATE_100M BIT(5)
+#define AQ_NIC_RATE_10M BIT(6)
-#define AQ_NIC_RATE_EEE_10G BIT(6)
-#define AQ_NIC_RATE_EEE_5G BIT(7)
-#define AQ_NIC_RATE_EEE_2GS BIT(8)
-#define AQ_NIC_RATE_EEE_1G BIT(9)
+#define AQ_NIC_RATE_EEE_10G BIT(7)
+#define AQ_NIC_RATE_EEE_5G BIT(8)
+#define AQ_NIC_RATE_EEE_2GS BIT(9)
+#define AQ_NIC_RATE_EEE_1G BIT(10)
+#define AQ_NIC_RATE_EEE_100M BIT(11)
#endif /* AQ_COMMON_H */
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c
b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c
index 7241cf92b43a..0c9dd8edc062 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c
@@ -611,6 +611,9 @@ static enum hw_atl_fw2x_rate eee_mask_to_ethtool_mask(u32
speed)
if (speed & AQ_NIC_RATE_EEE_1G)
rate |= SUPPORTED_1000baseT_Full;
+ if (speed & AQ_NIC_RATE_EEE_100M)
+ rate |= SUPPORTED_100baseT_Full;
+
return rate;
}
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
index a369705a786a..80dd744dcbd1 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
@@ -885,6 +885,10 @@ void aq_nic_get_link_ksettings(struct aq_nic_s *self,
ethtool_link_ksettings_add_link_mode(cmd, supported,
100baseT_Full);
+ if (self->aq_nic_cfg.aq_hw_caps->link_speed_msk & AQ_NIC_RATE_10M)
+ ethtool_link_ksettings_add_link_mode(cmd, supported,
+ 10baseT_Full);
+
if (self->aq_nic_cfg.aq_hw_caps->flow_control) {
ethtool_link_ksettings_add_link_mode(cmd, supported,
Pause);
@@ -924,6 +928,10 @@ void aq_nic_get_link_ksettings(struct aq_nic_s *self,
ethtool_link_ksettings_add_link_mode(cmd, advertising,
100baseT_Full);
+ if (self->aq_nic_cfg.link_speed_msk & AQ_NIC_RATE_10M)
+ ethtool_link_ksettings_add_link_mode(cmd, advertising,
+ 10baseT_Full);
+
if (self->aq_nic_cfg.fc.cur & AQ_NIC_FC_RX)
ethtool_link_ksettings_add_link_mode(cmd, advertising,
Pause);
@@ -954,6 +962,10 @@ int aq_nic_set_link_ksettings(struct aq_nic_s *self,
speed = cmd->base.speed;
switch (speed) {
+ case SPEED_10:
+ rate = AQ_NIC_RATE_10M;
+ break;
+
case SPEED_100:
rate = AQ_NIC_RATE_100M;
break;
--
2.20.1
