On Friday 09 February 2007 17:32, Larry Finger wrote:
> The specifications for the bcm43xx driver have been modified. This patch
> incorporates these changes in the code, which results in the BCM4311 and
> BCM4312 working. The name of one of the PHY parameters, previously known
> as "version", has been changed to "analog core version" .
>
> Signed-off-by: Larry Finger<[EMAIL PROTECTED]>
> ---
> @@ -729,19 +729,19 @@ static void bcm43xx_phy_initb5(struct bc
> struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
> struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
> u16 offset;
> + u16 value;
> + u8 old_channel;
>
> - if (phy->version == 1 &&
> - radio->version == 0x2050) {
Why do you delete the check to radio version.
It's still there in latest specs:
http://bcm-v4.sipsolutions.net/802.11/PHY/Init/B5
> + if (phy->analog == 1)
> bcm43xx_radio_write16(bcm, 0x007A,
> bcm43xx_radio_read16(bcm, 0x007A)
> | 0x0050);
> - }
> if ((bcm->board_vendor != PCI_VENDOR_ID_BROADCOM) &&
> (bcm->board_type != 0x0416)) {
> + value = 0x2120;
> for (offset = 0x00A8 ; offset < 0x00C7; offset++) {
> - bcm43xx_phy_write(bcm, offset,
> - (bcm43xx_phy_read(bcm, offset) +
> 0x2020)
> - & 0x3F3F);
> + bcm43xx_phy_write(bcm, offset, value);
> + value += 0x0202;
> }
I don't see how this matches specs.
> }
> bcm43xx_phy_write(bcm, 0x0035,
> @@ -776,7 +776,7 @@ static void bcm43xx_phy_initb5(struct bc
> bcm43xx_phy_read(bcm,
> BCM43xx_PHY_RADIO_BITFIELD) | (1 << 11));
> }
>
> - if (phy->version == 1 && radio->version == 0x2050) {
Dito.
> + if (phy->analog == 1) {
> bcm43xx_phy_write(bcm, 0x0026, 0xCE00);
> bcm43xx_phy_write(bcm, 0x0021, 0x3763);
> bcm43xx_phy_write(bcm, 0x0022, 0x1BC3);
> @@ -787,14 +787,15 @@ static void bcm43xx_phy_initb5(struct bc
> bcm43xx_phy_write(bcm, 0x0030, 0x00C6);
> bcm43xx_write16(bcm, 0x03EC, 0x3F22);
>
> - if (phy->version == 1 && radio->version == 0x2050)
Dito.
> + if (phy->analog == 1)
> bcm43xx_phy_write(bcm, 0x0020, 0x3E1C);
> else
> bcm43xx_phy_write(bcm, 0x0020, 0x301C);
>
> - if (phy->version == 0)
> + if (phy->analog == 0)
> bcm43xx_write16(bcm, 0x03E4, 0x3000);
>
> + old_channel = radio->channel;
> /* Force to channel 7, even if not supported. */
> bcm43xx_radio_selectchannel(bcm, 7, 0);
>
> @@ -816,11 +817,11 @@ static void bcm43xx_phy_initb5(struct bc
>
> bcm43xx_radio_write16(bcm, 0x007A, bcm43xx_radio_read16(bcm, 0x007A) |
> 0x0007);
>
> - bcm43xx_radio_selectchannel(bcm, BCM43xx_RADIO_DEFAULT_CHANNEL_BG, 0);
> + bcm43xx_radio_selectchannel(bcm, old_channel, 0);
>
> bcm43xx_phy_write(bcm, 0x0014, 0x0080);
> bcm43xx_phy_write(bcm, 0x0032, 0x00CA);
> - bcm43xx_phy_write(bcm, 0x88A3, 0x002A);
> + bcm43xx_phy_write(bcm, 0x002A, 0x88A3);
Well, this seems correct, but specs are still different. From where did you get
this?
Well, I don't review the rest until you say to which specs you did the changes.
;)
--
Greetings Michael.
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
