Using linkmode_adv_to_mii_adv_t and linkmode_adv_to_mii_ctrl1000_t
allows to simplify the code. In addition avoiding the conversion to
the legacy u32 advertisement format allows to remove the warning.
Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
Suggested-by: Andrew Lunn <and...@lunn.ch>
---
Changes in v2:
- added to series
---
drivers/net/phy/phy_device.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 7ddd91df9..a70a98dc9 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1564,24 +1564,20 @@ EXPORT_SYMBOL(phy_reset_after_clk_enable);
*/
static int genphy_config_advert(struct phy_device *phydev)
{
- u32 advertise;
- int bmsr, adv;
- int err, changed = 0;
+ int err, bmsr, changed = 0;
+ u32 adv;
/* Only allow advertising what this PHY supports */
linkmode_and(phydev->advertising, phydev->advertising,
phydev->supported);
- if (!ethtool_convert_link_mode_to_legacy_u32(&advertise,
- phydev->advertising))
- phydev_warn(phydev, "PHY advertising (%*pb) more modes than
genphy supports, some modes not advertised.\n",
- __ETHTOOL_LINK_MODE_MASK_NBITS,
- phydev->advertising);
+
+ adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
/* Setup standard advertisement */
err = phy_modify_changed(phydev, MII_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_100BASE4 |
ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
- ethtool_adv_to_mii_adv_t(advertise));
+ adv);
if (err < 0)
return err;
if (err > 0)
@@ -1598,13 +1594,7 @@ static int genphy_config_advert(struct phy_device
*phydev)
if (!(bmsr & BMSR_ESTATEN))
return changed;
- /* Configure gigabit if it's supported */
- adv = 0;
- if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
- phydev->supported) ||
- linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
- phydev->supported))
- adv = ethtool_adv_to_mii_ctrl1000_t(advertise);
+ adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
err = phy_modify_changed(phydev, MII_CTRL1000,
ADVERTISE_1000FULL | ADVERTISE_1000HALF,
--
2.22.0
