On Tue, Jul 30, 2019 at 12:54:17PM +0200, Pablo Neira Ayuso wrote:
[...]
> @@ -180,6 +181,29 @@ static int nft_setup_cb_call(struct nft_base_chain
> *basechain,
> return 0;
> }
>
> +/* Available priorities for hardware offload range: -8192..8191 */
> +#define NFT_BASECHAIN_OFFLOAD_PRIO_MAX (SHRT_MAX / 4)
> +#define NFT_BASECHAIN_OFFLOAD_PRIO_MIN (SHRT_MIN / 4)
> +#define NFT_BASECHAIN_OFFLOAD_PRIO_RANGE (USHRT_MAX / 4)
> +/* tcf_auto_prio() uses 0xC000 as base, then subtract one for each new
> chain. */
> +#define NFT_BASECHAIN_OFFLOAD_HW_PRIO_BASE (0xC000 + 1)
> +
> +u16 nft_chain_offload_priority(struct nft_base_chain *basechain)
> +{
> + u16 prio;
> +
> + if (basechain->ops.priority < NFT_BASECHAIN_OFFLOAD_PRIO_MIN ||
> + basechain->ops.priority > NFT_BASECHAIN_OFFLOAD_PRIO_MAX)
> + return 0;
> +
> + /* map netfilter chain priority to hardware priority. */
> + prio = basechain->ops.priority +
> + NFT_BASECHAIN_OFFLOAD_PRIO_MAX +
> + NFT_BASECHAIN_OFFLOAD_HW_PRIO_BASE;
> +
> + return prio;
This function should actually return:
return prio << 16;
> +}
> +
> static int nft_flow_offload_rule(struct nft_trans *trans,
> enum flow_cls_command command)
> {
