On 1/4/19 1:48 PM, Jeff Kirsher wrote: > The new ability added to the driver to use mii_bus to handle MII related > ioctls is causing compile issues when the driver is compiled into the > kernel (i.e. not a module). > > The problem was in selecting MDIO_DEVICE instead of the preferred PHYLIB > Kconfig option. The reason being that MDIO_DEVICE had a dependency on > PHYLIB and would be compiled as a module when PHYLIB was a module, no > matter whether ixgbe was compiled into the kernel. > > CC: Dave Jones <da...@codemonkey.org.uk> > CC: Steve Douthit <steph...@silicom-usa.com> > CC: Florian Fainelli <f.faine...@gmail.com> > Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com> > --- > v2: fixed up the Kconfig help section to include the clause 22/45 > address information and also changed the IXGBE_MDIO config option to be > dependent upon PHYLIB versus MDIO_BUS since that appears to be the > common usage > > v3: Steve Douthit found a much simpler solution of changing the > dependency from MDIO_DEVICE to PHYLIB, which is consistent with other > Ethernet drivers > > drivers/net/ethernet/intel/Kconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/net/ethernet/intel/Kconfig > b/drivers/net/ethernet/intel/Kconfig > index 31fb76ee9d82..a1246e89aad4 100644 > --- a/drivers/net/ethernet/intel/Kconfig > +++ b/drivers/net/ethernet/intel/Kconfig > @@ -159,7 +159,7 @@ config IXGBE > tristate "Intel(R) 10GbE PCI Express adapters support" > depends on PCI > select MDIO > - select MDIO_DEVICE > + select PHYLIB > imply PTP_1588_CLOCK > ---help--- > This driver supports Intel(R) 10GbE PCI Express family of >
Reviewed-by: Stephen Douthit <steph...@silicom-usa.com>
