The cpsw-phy-sel driver was replaced with new PHY driver phy-gmii-sel, so
deprecate cpsw-phy-sel bindings and update CPSW binding to use phy-gmii-sel
PHY bindings.
Cc: Kishon Vijay Abraham I <kis...@ti.com>
Cc: Tony Lindgren <t...@atomide.com>
Signed-off-by: Grygorii Strashko <grygorii.stras...@ti.com>
---
Documentation/devicetree/bindings/net/cpsw.txt | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt
b/Documentation/devicetree/bindings/net/cpsw.txt
index b3acebe..3264e19 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -22,7 +22,8 @@ Required properties:
- cpsw-phy-sel : Specifies the phandle to the CPSW phy mode selection
device. See also cpsw-phy-sel.txt for it's binding.
Note that in legacy cases cpsw-phy-sel may be
- a child device instead of a phandle.
+ a child device instead of a phandle
+ (DEPRECATED, use phys property instead).
Optional properties:
- ti,hwmods : Must be "cpgmac0"
@@ -44,6 +45,7 @@ Optional properties:
Slave Properties:
Required properties:
- phy-mode : See ethernet.txt file in the same directory
+- phys : phandle on phy-gmii-sel PHY (see
phy/ti-phy-gmii-sel.txt)
Optional properties:
- dual_emac_res_vlan : Specifies VID to be used to segregate the ports
@@ -85,12 +87,14 @@ Examples:
phy-mode = "rgmii-txid";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1 0>;
};
cpsw_emac1: slave@1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii-txid";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2 0>;
};
};
@@ -114,11 +118,13 @@ Examples:
phy-mode = "rgmii-txid";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1 0>;
};
cpsw_emac1: slave@1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii-txid";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2 0>;
};
};
--
2.10.5
