On Mon, Sep 17, 2018 at 05:19:57PM +0300, Baruch Siach wrote: > When the switching to the SFP detected link mode update the main > link_interface field as well. Otherwise, the link fails to come up when > the configured 'phy-mode' defers from the SFP detected mode. > > This fixes 1GB SFP module link up on eth3 of the Macchiatobin board that > is configured in the DT to "2500base-x" phy-mode.
link_interface isn't supposed to track the SFP link mode. In any case, this is only used when a PHY is attached. For a PHY on a SFP, phylink_connect_phy() should be using link_config.interface and not link_interface there. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 13.8Mbps down 630kbps up According to speedtest.net: 13Mbps down 490kbps up
