ILT entry requires 12 bit right shifted physical address.
Existing mask for ILT entry of physical address i.e.
ILT_ENTRY_PHY_ADDR_MASK is not sufficient to handle 64bit
address because upper 8 bits of 64 bit address were getting
masked which resulted in completer abort error on
PCIe bus due to invalid address.
Fix that mask to handle 64bit physical address.
Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support")
Signed-off-by: Shahed Shaikh <shahed.sha...@cavium.com>
Signed-off-by: Ariel Elior <ariel.el...@cavium.com>
---
drivers/net/ethernet/qlogic/qed/qed_cxt.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c
b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
index 00f41c1..820b226 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
@@ -77,7 +77,7 @@
#define ILT_CFG_REG(cli, reg) PSWRQ2_REG_ ## cli ## _ ## reg ## _RT_OFFSET
/* ILT entry structure */
-#define ILT_ENTRY_PHY_ADDR_MASK 0x000FFFFFFFFFFFULL
+#define ILT_ENTRY_PHY_ADDR_MASK (~0ULL >> 12)
#define ILT_ENTRY_PHY_ADDR_SHIFT 0
#define ILT_ENTRY_VALID_MASK 0x1ULL
#define ILT_ENTRY_VALID_SHIFT 52
--
1.7.1
