Hi all, This patch series extracts the parts of the patch set that are likely not to be controversial and actually bringing multi-queue support to DSA-created network devices.
With these patches, we can now use sch_multiq as documented under Documentation/networking/multique.txt and let applications dedice the switch port output queue they want to use. Currently only Broadcom tags utilize that information. Changes from RFC: - dropped the ability to configure RX queues since we don't do anything with those just yet - dropped the patches that dealt with binding the DSA slave network devices queues with their master network devices queues this will be worked on separately. Florian Fainelli (4): net: dsa: Allow switch drivers to indicate number of TX queues net: dsa: tag_brcm: Set output queue from skb queue mapping net: dsa: bcm_sf2: Advertise number of egress queues net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping drivers/net/dsa/bcm_sf2.c | 12 ++++++++++++ include/net/dsa.h | 3 +++ net/dsa/slave.c | 8 ++++++-- net/dsa/tag_brcm.c | 3 ++- 4 files changed, 23 insertions(+), 3 deletions(-) -- 1.9.1
