As the SH77{34|63} manuals are freely available, I've checked the EESIPR
values written against the manuals, and they appeared to set the reserved
bits 11-15 (which should be 0 on write). Fix those EESIPR values.
Fixes: 380af9e390ec ("net: sh_eth: CPU dependency code collect to "struct
sh_eth_cpu_data"")
Fixes: f5d12767c8fd ("sh_eth: get SH77{34|63} support out of #ifdef")
Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
---
This patch is against DaveM's 'net.git' repo.
drivers/net/ethernet/renesas/sh_eth.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Index: net/drivers/net/ethernet/renesas/sh_eth.c
===================================================================
--- net.orig/drivers/net/ethernet/renesas/sh_eth.c
+++ net/drivers/net/ethernet/renesas/sh_eth.c
@@ -802,7 +802,7 @@ static struct sh_eth_cpu_data sh7734_dat
.ecsr_value = ECSR_ICD | ECSR_MPD,
.ecsipr_value = ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP,
- .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
+ .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003f07ff,
.tx_check = EESR_TC1 | EESR_FTC,
.eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
@@ -831,7 +831,7 @@ static struct sh_eth_cpu_data sh7763_dat
.ecsr_value = ECSR_ICD | ECSR_MPD,
.ecsipr_value = ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP,
- .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
+ .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003f07ff,
.tx_check = EESR_TC1 | EESR_FTC,
.eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
