When testing stmmac with my QoS reference design I checked a problem in the
CSR clock configuration that was impossibilitating the phy discovery, since
every read operation returned 0x0000ffff. This patch fixes the issue.
Signed-off-by: Joao Pinto <jpi...@synopsys.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 23322fd..fda01f7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -81,8 +81,8 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr,
int phyreg)
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
- value |= (priv->clk_csr & priv->hw->mii.clk_csr_mask)
- << priv->hw->mii.clk_csr_shift;
+ value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
+ & priv->hw->mii.clk_csr_mask;
if (priv->plat->has_gmac4)
value |= MII_GMAC4_READ;
@@ -122,8 +122,8 @@ static int stmmac_mdio_write(struct mii_bus *bus, int
phyaddr, int phyreg,
& priv->hw->mii.addr_mask;
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
- value |= ((priv->clk_csr & priv->hw->mii.clk_csr_mask)
- << priv->hw->mii.clk_csr_shift);
+ value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
+ & priv->hw->mii.clk_csr_mask;
if (priv->plat->has_gmac4)
value |= MII_GMAC4_WRITE;
--
2.9.3
