On 10/31/2016 08:05 PM, Andrew Lunn wrote: > On Mon, Oct 31, 2016 at 05:56:24PM +0100, Neil Armstrong wrote: >> Add driver for the Internal RMII PHY found in the Amlogic Meson GXL SoCs. >> >> This PHY seems to only implement some standard registers and need some >> workarounds to provide autoneg values from vendor registers. >> >> Some magic values are currently used to configure the PHY, and this a >> temporary setup until clarification about these registers names and >> registers fields are provided by Amlogic. >> >> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com> >> --- >> drivers/net/phy/Kconfig | 5 +++ >> drivers/net/phy/Makefile | 1 + >> drivers/net/phy/meson-gxl.c | 81 >> +++++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 87 insertions(+) >> create mode 100644 drivers/net/phy/meson-gxl.c >> >> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig >> index 2651c8d..09342b6 100644 >> --- a/drivers/net/phy/Kconfig >> +++ b/drivers/net/phy/Kconfig >> @@ -226,6 +226,11 @@ config DP83867_PHY >> ---help--- >> Currently supports the DP83867 PHY. >> >> +config MESON_GXL_PHY >> + tristate "Amlogic Meson GXL Internal PHY" >> + ---help--- >> + Currently has a driver for the Amlogic Meson GXL Internal PHY >> + > > Hi Neil > > Please keep them in alphabetic order. This goes after Marvell. > >> config FIXED_PHY >> tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs" >> depends on PHYLIB >> diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile >> index e58667d..1511b3e 100644 >> --- a/drivers/net/phy/Makefile >> +++ b/drivers/net/phy/Makefile >> @@ -44,6 +44,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o >> obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o >> obj-$(CONFIG_MICREL_PHY) += micrel.o >> obj-$(CONFIG_MICROCHIP_PHY) += microchip.o >> +obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o >> obj-$(CONFIG_MICROSEMI_PHY) += mscc.o > > Again, alphabetic order. > > Andrew >
Sorry, rebase issue. Neil
