On Mon, Oct 31, 2016 at 05:56:24PM +0100, Neil Armstrong wrote:
> Add driver for the Internal RMII PHY found in the Amlogic Meson GXL SoCs.
>
> This PHY seems to only implement some standard registers and need some
> workarounds to provide autoneg values from vendor registers.
>
> Some magic values are currently used to configure the PHY, and this a
> temporary setup until clarification about these registers names and
> registers fields are provided by Amlogic.
>
> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
> ---
> drivers/net/phy/Kconfig | 5 +++
> drivers/net/phy/Makefile | 1 +
> drivers/net/phy/meson-gxl.c | 81
> +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 87 insertions(+)
> create mode 100644 drivers/net/phy/meson-gxl.c
>
> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> index 2651c8d..09342b6 100644
> --- a/drivers/net/phy/Kconfig
> +++ b/drivers/net/phy/Kconfig
> @@ -226,6 +226,11 @@ config DP83867_PHY
> ---help---
> Currently supports the DP83867 PHY.
>
> +config MESON_GXL_PHY
> + tristate "Amlogic Meson GXL Internal PHY"
> + ---help---
> + Currently has a driver for the Amlogic Meson GXL Internal PHY
> +
Hi Neil
Please keep them in alphabetic order. This goes after Marvell.
> config FIXED_PHY
> tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
> depends on PHYLIB
> diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> index e58667d..1511b3e 100644
> --- a/drivers/net/phy/Makefile
> +++ b/drivers/net/phy/Makefile
> @@ -44,6 +44,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o
> obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
> obj-$(CONFIG_MICREL_PHY) += micrel.o
> obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
> +obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
> obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
Again, alphabetic order.
Andrew
