On 8/22/2016 3:43 PM, Xander Huff wrote:
Like the ksz8081, the ksz9031 has the behavior where it will clear the interrupt
enable bits when leaving power down. This takes advantage of the solution
provided by f5aba91.
Signed-off-by: Xander Huff <xander.h...@ni.com>
Signed-off-by: Nathan Sullivan <nathan.sulli...@ni.com>
Natinst-ReviewBoard-ID: 149877
---
drivers/net/phy/micrel.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 053e879..885ac9c 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -964,7 +964,7 @@ static struct phy_driver ksphy_driver[] = {
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
.suspend = genphy_suspend,
- .resume = genphy_resume,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8873MLL,
.phy_id_mask = MICREL_PHY_ID_MASK,
Please disregard this patch as it was accidentally sent. Please instead refer to
my subsequent email with the subject:
"[PATCH] phy: micrel: Reenable interrupts during resume for ksz9031"
--
Xander Huff
Staff Software Engineer
National Instruments
