From: Jacob Keller <jacob.e.kel...@intel.com>
Use a new #define FM10K_VLAN_OVERRIDE even though we're using the exact
same bit. The reason for this is clarity in the code, otherwise you can
read FM10K_VLAN_CLEAR and think it should be removed. Also add a comment
explaining why the FM10K_VLAN_OVERRIDE bit is set.
Signed-off-by: Jacob Keller <jacob.e.kel...@intel.com>
Tested-by: Krishneil Singh <krishneil.k.si...@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com>
---
drivers/net/ethernet/intel/fm10k/fm10k_pf.c | 8 ++++++--
drivers/net/ethernet/intel/fm10k/fm10k_type.h | 1 +
drivers/net/ethernet/intel/fm10k/fm10k_vf.c | 2 +-
3 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
index ffe9805..88d5acf 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
@@ -864,9 +864,13 @@ static s32 fm10k_iov_assign_default_mac_vlan_pf(struct
fm10k_hw *hw,
fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0);
fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0);
- /* determine correct default VLAN ID */
+ /* Determine correct default VLAN ID. The FM10K_VLAN_OVERRIDE bit is
+ * used here to indicate to the VF that it will not have privilege to
+ * write VLAN_TABLE. All policy is enforced on the PF but this allows
+ * the VF to correctly report errors to userspace rqeuests.
+ */
if (vf_info->pf_vid)
- vf_vid = vf_info->pf_vid | FM10K_VLAN_CLEAR;
+ vf_vid = vf_info->pf_vid | FM10K_VLAN_OVERRIDE;
else
vf_vid = vf_info->sw_vid;
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_type.h
b/drivers/net/ethernet/intel/fm10k/fm10k_type.h
index 995dcee..f3f37a4 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_type.h
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_type.h
@@ -350,6 +350,7 @@ struct fm10k_hw;
#define FM10K_VLAN_TABLE_VSI_MAX 64
#define FM10K_VLAN_LENGTH_SHIFT 16
#define FM10K_VLAN_CLEAR BIT(15)
+#define FM10K_VLAN_OVERRIDE FM10K_VLAN_CLEAR
#define FM10K_VLAN_ALL \
((FM10K_VLAN_TABLE_VID_MAX - 1) << FM10K_VLAN_LENGTH_SHIFT)
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_vf.c
b/drivers/net/ethernet/intel/fm10k/fm10k_vf.c
index 86c358c..801238d 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_vf.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_vf.c
@@ -228,7 +228,7 @@ s32 fm10k_msg_mac_vlan_vf(struct fm10k_hw *hw, u32
**results,
ether_addr_copy(hw->mac.perm_addr, perm_addr);
hw->mac.default_vid = vid & (FM10K_VLAN_TABLE_VID_MAX - 1);
- hw->mac.vlan_override = !!(vid & FM10K_VLAN_CLEAR);
+ hw->mac.vlan_override = !!(vid & FM10K_VLAN_OVERRIDE);
return 0;
}
--
2.5.5
