Hi,

I have both 1Gig and 10Gig DWDM optics from SF.com being using in Cisco and Mikrotik switches.

Never had an issue with them. Work flawless .. for years.

Kind regards,
Martin List-Petersen
Airwire Ltd.


On 18/02/2019 19:54, Anderson, Charles R wrote:
I concur.  I have also used CWDM and DWDM optics and they are fine.  I have had 
one QSFP+ optic go bad.

On Mon, Feb 18, 2019 at 07:47:10PM +0000, Brian R wrote:
Samir,

I have purchased over a thousand SFPs from Fiber Store.  I can recall less than 
5 having problems when we received them (not all even DOA) and I know less than 
10 dead even after deployment.  Some we have ad running for 4+ years.  We have 
done very little with their SFP+ equipment, really only testing and a few lower 
priority links.
The only downside to the SFPs that we found was the variance of power.  Say an 
Adtran, Cisco, Juniper, HP SFP is rated from -3dB to -8 db (all units I have 
used them with), the equivalent FS direct SFP we have seen as hot as 3dB and as 
weak as -15dB.  These extremes are fairly rare but we have still seen them.
Distribution (approximate):
80% SM single fiber SFPs (mostly 10km - 40km, some 60km & 80km)
7% 1Gb Copper
5% MM SFPs
5% SM dual fiber SFPs
3% others (SFP+, GPON, testing, etc)

I have not used them for any DWDM applications and only used them a few times 
on an older CWDM link that used standard SFPs into a MUX.  This was not over 
great distances (less than 40 miles).  With WDM SFP power consistency was 
important so we did not play much with it, granted most of the SFPs I am 
purchasing are in the $10-$25 range so take the extremes with a grain of salt.

Their sales has always been very responsive and helpful.  The 
support/engineering, the few times I worked with them, were helpful but the 
language barrier was harder here.

Brian

________________________________
From: NANOG <nanog-boun...@nanog.org> on behalf of Samir Rana 
<samir.r...@cybera.ca>
Sent: Sunday, February 17, 2019 12:42 PM
To: nanog@nanog.org
Subject: fs.com dwdm equipment

Hello All,

Does anybody have experience with fs.com<http://fs.com dwdm equipment in their 
production environment? Are you they working without any issue? How's their 
warranty support if the issue arises?

Thanks in advance for all the answers and help.


--
Airwire Ltd. - Ag Nascadh Pobail an Iarthair
http://www.airwire.ie
Phone: 091-395 000
Registered Office: Moy, Kinvara, Co. Galway, 091-395 000 - Registered in Ireland No. 508961

Reply via email to