The BMP21 has kinda sucky cable labels, IMO. -Steve
On Tue, Aug 21, 2012 at 9:46 PM, Mike Lyon <mike.l...@gmail.com> wrote: > I bought the Brady BMP21 handheld labeler from Frys about a month ago. > It takes 6x AA batteries i believe. You can buy the power cable and > case for it if you want. I love it so far. > > -mike > > > > Sent from my iPhone > > On Aug 21, 2012, at 18:29, Seth Mattinen <se...@rollernet.us> wrote: > > > On 8/21/12 6:10 PM, Robert E. Seastrom wrote: > >> Hey everyone, > >> > >> Many moons ago I worked in a place where we had a Brady LS2000 wire > >> labeler. So long as the supplies were fresh it was great. > >> > >> In the storage unit I have a Brady TLS2200. Supplies are expensive, > >> but it works reasonably well. Unfortunately the battery is shot > >> (gotta replace that). > >> > >> It seems to me that as cheap as the Brother P-Touch type labelers have > >> gotten that there might be some product by (Brady|Dymo|Brother|etc) > >> that everyone uses and recommends these days which is (a) cheap enough > >> that they can be deployed en masse rather than treated as a scarce > >> resource, (b) hopefully runs on standard (such as AAA) battery types, > >> and (c) has reasonably priced supplies. > >> > >> Labeling cables is mostly what I'm interested in. The el-cheapo > >> p-touch seems adequate to putting hostnames on machines. > >> > >> Thoughts? > >> > > > > > > P-Touch with TZe tapes for me. I have stuff on the roof labeled with TZe > > tape and they still look new after about a year of exposure Disclaimer: > > I'm in the high desert. > > > > ~Seth > > > >
