manufacturers printing the mac address of eth0 and the bmc on the back of the case somewhere at the factory would be appreciated too.

preferably with a barcode as well.

the mac addresses is usually nowhere to be found on servers.

the things should just ship with the bmc set to dhcp, a barcode readable label with the mac addresses, serial console enabled at 9600n81 with portsharing with the bmc SOL, and pxe and wol enabled --

who do these manufacturers think they're selling to anyway, people that buy just one unit and have all day to install it or what?

Greetings,

Sven Olaf Kamphuis,
CB3ROB Ltd. & Co. KG
=========================================================================
Address: Koloniestrasse 34         VAT Tax ID:      DE267268209
         D-13359                   Registration:    HRA 42834 B
         BERLIN                    Phone:           +31/(0)87-8747479
         Germany                   GSM:             +49/(0)152-26410799
RIPE:    CBSK1-RIPE                e-Mail:          s...@cb3rob.net
=========================================================================
<penpen> C3P0, der elektrische Westerwelle
http://www.facebook.com/cb3rob
=========================================================================

Confidential: Please be advised that the information contained in this
email message, including all attached documents or files, is privileged
and confidential and is intended only for the use of the individual or
individuals addressed. Any other use, dissemination, distribution or
copying of this communication is strictly prohibited.


On Thu, 16 Feb 2012, Chris Adams wrote:

Once upon a time, Bryan Irvine <sparcta...@gmail.com> said:
And watch for the removable faceplates.  We've been bitten before
after a server move by rebooting a server that had the correct label
but the wrong faceplate.  Now we label the faceplate as well as
underneath of it too.  :-)

Not just faceplates; we got a couple of racks of used Dell servers and
were rolling through testing them when we discovered a couple where the
Dell tag on the lid didn't match the firmware.  The tag on the back did;
at some point, somebody had switched lids on the cases!
--
Chris Adams <cmad...@hiwaay.net>
Systems and Network Administrator - HiWAAY Internet Services
I don't speak for anybody but myself - that's enough trouble.


Reply via email to