I need to do MPLS (vlls), VXLAN, Multicast, full routing tables, multiple VRFs, q-in-q, QoS Anything with 1Tbs of throughput should be more than enough at this time for me I also need it to be able to support 100G interfaces, 1G and 10G
Javier Gutierrez Guerra Network Analyst CCNA R&S, JNCIA Westman Communications Group Phone: 204-717-2827 Email: guer...@westmancom.com<mailto:guer...@westmancom.com> [WCG_Corp_Logo_horiz_cFullcolorHR]<http://westmancom.com/personal/> [cisco-certified-network-associate-routing-and-switching-ccna-routing-and-switching] From: Ryan Hamel <administra...@rkhtech.org> Sent: May 7, 2021 4:23 PM To: Javier Gutierrez Guerra <guer...@westmancom.com>; nanog@nanog.org Subject: RE: Juniper hardware recommendation CAUTION: This email is from an external source. Do not click links or open attachments unless you recognize the sender and know the content is safe. Hello! We wouldn’t be able to give any sort of answer without knowing your current and future requirements. Each model has its own throughput classes, and sometimes a full on MX router isn’t required. From: NANOG <nanog-bounces+ryan=rkhtech....@nanog.org<mailto:nanog-bounces+ryan=rkhtech....@nanog.org>> On Behalf Of Javier Gutierrez Guerra Sent: Friday, May 7, 2021 1:55 PM To: nanog@nanog.org<mailto:nanog@nanog.org> Subject: Juniper hardware recommendation Hi, Just out of curiosity, what would you recommend using for a core router/switch from Juniper? MX208,480,10K Datasheets show them all as very nice and powerful devices (although they do use a lot of rack space and side to side airflow is painful) but I’m just wondering here what most people use and how good or bad of an experience you have with it 😊 Thanks, Javier Gutierrez Guerra Network Analyst CCNA R&S, JNCIA Westman Communications Group Phone: 204-717-2827 Email: guer...@westmancom.com<mailto:guer...@westmancom.com> [WCG_Corp_Logo_horiz_cFullcolorHR]<http://westmancom.com/personal/> [cisco-certified-network-associate-routing-and-switching-ccna-routing-and-switching]
