> Hi, > > I have setup my myth box (an Athlon 1800+, 756Meg Memory, 100G+ > Harddrive space, nic, and the afore mentioned pvr-500). Everything > seems to run, but I only get static on "Tuner 4" and a very poor picture > (if I get one) on "tuner 6". I have coax and composite cables attached > to the main card, I don't have the daughter card installed. When I look > at "tuner status" it shows: > > tuner 1: not available > tuner 2: not available > tuner 4: not recording > tuner 6: not recording > > I followed the instructions off of mythtv.org and placed to tuner > devices: > > /dev/video0 & /dev/video1 > > I also assigned video sources to both tuners (although there wasn't any > named tuner0 or tuner1 -- just 2 lines of tuner) and both composite > lines (both 0 & 1).
The PVR-500 is seen by ivtv as two 150's, each with one tuner. Prior to ivtv4.1 these were both called tuner0, but >=4.1 they have been renamed just tuner, so your two lines of "tuner" are correct. I don't understand how you have 6 tuners with one pvr 500 (or have I missed something?). Marius _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
