On 1/24/06, Nathan A. Smith <[EMAIL PROTECTED]> wrote: > On Mon, 2006-01-23 at 21:54 -0700, Nathan A. Smith wrote: > > Hi, > > > > I have setup my myth box (an Athlon 1800+, 756Meg Memory, 100G+ > > Harddrive space, nic, and the afore mentioned pvr-500). Everything > > seems to run, but I only get static on "Tuner 4" and a very poor picture > > (if I get one) on "tuner 6". I have coax and composite cables attached > > to the main card, I don't have the daughter card installed. When I look > > at "tuner status" it shows: > > > > tuner 1: not available > > tuner 2: not available > > tuner 4: not recording > > tuner 6: not recording > > > > I followed the instructions off of mythtv.org and placed to tuner > > devices: > > > > /dev/video0 & /dev/video1 > > > > I also assigned video sources to both tuners (although there wasn't any > > named tuner0 or tuner1 -- just 2 lines of tuner) and both composite > > lines (both 0 & 1). > > > > What else should I be trying? > > > > Any help would be greatly appreciated > > > > Nasa > > Ok, > > I figured some log data would be helpful (I hope), so here it is: > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.4.1 (tagged release) loading > ivtv: Linux version: 2.6.12-12mdk 686 gcc-4.0 [snip]
The log data looks ok. Exactly what Capture Card and Input Connections do you have in mythtv-setup? -Jerry _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
