----- Original Message -----
From: "LawrenceLowe" <[email protected]>
To: "mogtalk2" <[email protected]>
Sent: Monday, June 25, 2012 9:33 AM
Subject: RE: [mogtalk2] petrol leak
Hi Peter,
Your two photos are spot on; luckily my chassis cross-member has only
surface rust that I have now dealt with and the large metal plate you
pictured is in the garage having been sanded off and coated in a rust
inhibiting paint.
I sprayed a generous amount of rust inhibitor down the very narrow gap
between the rear cross-member and the bottom of the tank in the hope that it
might help for the future.
Thanks for the pictures,
Lawrence
-----Original Message-----
From: Peter Moloney [mailto:[email protected]]
Sent: Monday, June 25, 2012 9:07 AM
To: mogtalk2
Subject: Re: [mogtalk2] petrol leak
Hi Lawrence,
Glad you checked out the chassis crossmember under the spare wheel plate -
This time last year I was having the petrol tank re-lined, and a new
crossmember welded in!!!!
The area behind the spare wheel plate is a total road salt and grit trap!
Best of luck with the hoses.
Peter
Peter Moloney
-------------------------------------------
View posts on The Mail Archive
http://www.mail-archive.com/[email protected]/
[http://www.mail-archive.com/[email protected]/]
Modify Your Subscription:
https://www.listbox.com/member/?&;
Powered by Listbox: http://www.listbox.com
-------------------------------------------
View posts on The Mail Archive
http://www.mail-archive.com/[email protected]/
[http://www.mail-archive.com/[email protected]/]
Modify Your Subscription:
https://www.listbox.com/member/?member_id=22459785&id_secret=22459785-4a39ddf8
Powered by Listbox: http://www.listbox.com
