Hallo > The following solved my immediate need, but it's a kludge rather than > a solution. > > 1) I pulled RAM chips out of my computer and let it run with 1 GB of > memory. Reducing the size of physical memory to 2 GB was not enough. I > suppose adding a mem=1GB option to /boot/grub/grub.conf, as Klaus > suggested, should also solved the problem. I used mem=1G because I have 2GB Modules in my system.
> 2) Kernel detects my Miro DC30 card and loads the driver, but does not > do so correctly. I have to remove the driver manually and reload it > with "card=3" option: That is bad. > # rmmod zr36067 > # modprobe zr36067 card=3 > > Ad 1) I suppose the proper solution would be to integrate patches for > 64-bit systems upstream. If Klaus can tell if the patch he wrote for the 2.6.24 Kernel will likely work for newer versions of the linux Kernel I will give it a try next weekend with the latest 2.6.34 Kernel. Else I will try older 2.6.26 > Ad 2) Back in the old times, we users of DC30 needed to add a line > saying "options zr36067 card=3" to /etc/modprobe.conf. I have to > figure it out where in the /etc/modprobe.d/ hierarchy this fits. Things changed during the last 10 years a lot. auf hoffentlich bald, Berni the Chaos of Woodquarter Email: shadowl...@utanet.at www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------------------------------ _______________________________________________ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users
