On Wed, Mar 5, 2008 at 7:21 PM, Ronald S. Bultje <[EMAIL PROTECTED]> wrote:
> Hi Keith,
>
>
> On Wed, Mar 5, 2008 at 6:08 PM, Keith Richie <[EMAIL PROTECTED]>
> wrote:
> >
> >
> >
> > On Wed, Mar 5, 2008 at 1:51 PM, Ronald S. Bultje <[EMAIL PROTECTED]>
> wrote:
> > > On Wed, Mar 5, 2008 at 1:04 PM,
> <[EMAIL PROTECTED]>
> > > wrote:
> > > > Date: Tue, 4 Mar 2008 07:53:22 -0500, From: "Keith Richie"
> > > <[EMAIL PROTECTED]>:For the last week I've spent countless hours
> on
> > > this, and have settled
> > > >
> > > > on the conclusion that I just can't get it to work. No matter the
> > > > combination, the results are exactly the same. Board is detected and
> > > > modules load properly. Xawtv displays an overlay just fine. No
> > > > capturing is possible.
> > > >
> > > >
> > > > I managed to borrow an old DC10 from a friend. This card works out of
> the
> > > box.
> > >
> > > To settle for the simple stuff, did you try lowering the framesize
> (-d2/4)
> > > or quality (-q50, -q20, etc.)? That makes a difference in some cases
> with
> > > the Buz.
> >
> >
> >
> >
> > I did. I'm honestly out of ideas on this. Just a little while ago I
> > installed Arch Linux 64bit (2.6.24), booted into single user mode,
> > removed a stick of ram, used mem=512m in grub (gave me 512mb of upper
> > mem). Ran lavrec as root with -d 4 - q 10. Exact same errors. Dug out
> > an old intel 850 mother board for the hell of it, exact same errors.
> >
> > Either the card is a rare golden/beta/flawed sample, or I'm having a
> > serious PEBKAC syndrome!
>
> I don't believe that stuff. :-). could you try booting with boot options
> noapic or acpi=off? those have, at points, been reported to fix such
> problems also.
>
> Ronald
>
Neither changed anything.
uname -a
Linux arch 2.6.24-ARCH #1 SMP PREEMPT Tue Feb 26 23:47:57 CET 2008
x86_64 Genuine Intel(R) CPU 2140 @ 1.60GHz GenuineIntel GNU/Linux
dmesg|grep irq
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 19
ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 19
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe5004000
MJPEG[0]: Zoran ZR36067 (rev 2) irq: 20, memory: 0xe4001000
Bios reports the card as being on IRQ 7, all by its lonesome.
I've also attached my dmesg after boot, and after a failed capture
attempt, using options suggested earlier up, adding -d 4 -q 10.
modprobe'd zr36067 debug=3
Linux version 2.6.24-ARCH ([EMAIL PROTECTED]) (gcc version 4.2.3) #1 SMP
PREEMPT Tue Feb 26 23:47:57 CET 2008
Command line: root=/dev/sda1 ro vga=794 acpi=off mem=1024M
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 262144) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.4 present.
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 262144) 1 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 262144
On node 0 totalpages: 262047
DMA zone: 56 pages used for memmap
DMA zone: 1206 pages reserved
DMA zone: 2737 pages, LIFO batch:0
DMA32 zone: 3528 pages used for memmap
DMA32 zone: 254520 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at:
0xFEE00000
Processor #0 (Bootup-CPU)
Processor #1
I/O APIC #2 at 0xFEC00000.
Setting APIC routing to flat
Processors: 2
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 33200 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257257
Kernel command line: root=/dev/sda1 ro vga=794 acpi=off mem=1024M
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PIT
time.c: Detected 1607.769 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1025184k/1048576k available (2821k kernel code, 22640k reserved, 1097k
data, 264k init)
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3218.40 BogoMIPS (lpj=5362252)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ExtINT not setup in hardware but reported by MP table
Using local APIC timer interrupts.
APIC timer calibration result 12560692
Detected 12.560 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3216.50 BogoMIPS (lpj=5359208)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 120 bytes
NET: Registered protocol family 16
PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without
MMCONFIG support.
PCI: Using configuration type 1
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Force enabled HPET at base address 0xfed00000
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/27b8] at 0000:00:1f.0
PCI->APIC IRQ transform: 0000:00:01.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 19
PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 20
PCI->APIC IRQ transform: 0000:02:05.0[A] -> IRQ 21
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
hpet clockevent registered
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: e0000000-e2ffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1e.0
IO window: a000-afff
MEM window: e3000000-e4ffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1797k freed
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 5120k,
total 262144k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Freeing unused kernel memory: 264k freed
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
ata1.00: ATAPI: HP DVD Writer 1040d, EH24, max UDMA/66
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
ata2: port disabled. ignoring.
scsi 0:0:0:0: CD-ROM HP DVD Writer 1040d EH24 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 19
ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 19
ata3.00: HPA detected: current 625140335, native 625142448
ata3.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
ata3.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: HPA detected: current 976771055, native 976773168
ata3.01: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
ata3.01: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 2:0:1:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 625140335 512-byte hardware sectors (320072 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sda] 625140335 512-byte hardware sectors (320072 MB)
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 sda3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:1:0: [sdb] 976771055 512-byte hardware sectors (500107 MB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:1:0: [sdb] 976771055 512-byte hardware sectors (500107 MB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdb: sdb1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sd 2:0:1:0: [sdb] Attached SCSI disk
usb 1-1: new full speed USB device using uhci_hcd and address 2
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe5004000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb 1-1: configuration #1 chosen from 1 choice
usb usb5: configuration #1 chosen from 1 choice
usb 1-1: can't set config #1, error -71
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 1-1: USB disconnect, address 2
JFS: nTxBlock = 8028, nTxLock = 64225
usb 1-1: new full speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as
/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input2
input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM)] on usb-0000:00:1d.3-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
r8169 Gigabit Ethernet driver 2.2LK loaded
eth0: RTL8169sc/8110sc at 0xffffc2000000a000, 00:1a:4d:8b:d5:af, XID 18000000
IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:1:0: Attached scsi generic sg2 type 0
usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x324C
usbcore: registered new interface driver usblp
intel_rng: FWH not detected
input: PC Speaker as /devices/platform/pcspkr/input/input3
Linux video capture interface: v2.00
Linux video codec intermediate layer: v0.2
Zoran MJPEG board driver version 0.9.5
MJPEG[0]: Zoran ZR36067 (rev 2) irq: 20, memory: 0xe4001000
MJPEG[0]: subsystem vendor=0x1031 id=0xd801
ZORAN: 1 card(s) found
DC30plus[0]: zr36057_init() - initializing card[0], zr=ffffffff88205d40
Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
r8169: eth0: link up
nvidia: module license 'NVIDIA' taints kernel.
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST
2008
DC30plus[0]: zoran_open(lavrec, pid=[3897]), users(-)=0
DC30plus[0]: jpg_sync() - timeout: codec isr=0x1c
DC30plus[0]: jpg_qbuf() - stop streaming but not in streaming mode
DC30plus[0]: zoran_close(lavrec, pid=[3897]), users(+)=1
DC30plus[0]: zoran_open(lavrec, pid=[3901]), users(-)=0
DC30plus[0]: jpg_sync() - timeout: codec isr=0x1c
DC30plus[0]: jpg_qbuf() - stop streaming but not in streaming mode
DC30plus[0]: zoran_close(lavrec, pid=[3901]), users(+)=1
DC30plus[0]: zoran_open(lavrec, pid=[3954]), users(-)=0
DC30plus[0]: jpg_sync() - timeout: codec isr=0x18
DC30plus[0]: jpg_qbuf() - stop streaming but not in streaming mode
DC30plus[0]: zoran_close(lavrec, pid=[3954]), users(+)=1
DC30plus[0]: zoran_open(lavrec, pid=[3958]), users(-)=0
DC30plus[0]: jpg_sync() - timeout: codec isr=0x18
DC30plus[0]: jpg_qbuf() - stop streaming but not in streaming mode
DC30plus[0]: zoran_close(lavrec, pid=[3958]), users(+)=1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
Zoran MJPEG board driver version 0.9.5
MJPEG[0]: Zoran ZR36067 (rev 2) irq: 20, memory: 0xe4001000
MJPEG[0]: subsystem vendor=0x1031 id=0xd801
MJPEG[0]: find_zr36057() - trying to autodetect card type
MJPEG[0]: find_zr36057() - card DC30plus detected
DC30plus[0]: Initializing i2c bus...
DC30plus[0]: i2c_client_register() - driver id = 42
DC30plus[0]: i2c_client_register() - driver id = 48
DC30plus[0]: Initializing videocodec bus...
DC30plus[0]: jpeg_codec_sleep() - sleep GPIO=0x81008888
DC30plus[0]: jpeg_codec_sleep() - wake GPIO=0x85008888
ZORAN: 1 card(s) found
DC30plus[0]: zr36057_init() - initializing card[0], zr=ffffffff88205d40
DC30plus[0]: dc10_init()
DC30plus[0]: jpeg_codec_sleep() - sleep GPIO=0x23008888
DC30plus[0]: jpeg_codec_sleep() - wake GPIO=0x27008888
DC30plus[0]: jpeg_codec_sleep() - wake GPIO=0x2f008888
DC30plus[0]: jpeg_codec_sleep() - sleep GPIO=0x2b008888
DC30plus[0]: enable_jpg(IDLE)
DC30plus[0]: Guests: 0x10 0x21 0x10 0x00 0x10 0x10 0x11
DC30plus[0]: Detecting guests activity, please wait...
DC30plus[0]: Guests: 0x10 0x21 0x10 0xf5 0x10 0x10 0x11
DC30plus[0]: 20: 4 => 0x0f
DC30plus[0]: 26: 4 => 0xff
DC30plus[0]: 26: 4 => 0xd5
DC30plus[0]: 26: 4 => 0x52
DC30plus[0]: 26: 4 => 0xd9
DC30plus[0]: 26: 4 => 0x00
DC30plus[0]: 51: 4 => 0x08
DC30plus[0]: 26: 4 => 0x06
DC30plus[0]: interrupts received: GIRQ1:50 GIRQ0:50 queue_state=0/0/0/0
DC30plus[0]: procfs entry /proc/zoran0 allocated. data=ffffffff88205d40
DC30plus[0]: zoran_open(lavrec, pid=[4099]), users(-)=0
DC30plus[0]: dc10_init()
DC30plus[0]: jpeg_codec_sleep() - sleep GPIO=0x21008888
DC30plus[0]: jpeg_codec_sleep() - wake GPIO=0x25008888
DC30plus[0]: jpeg_codec_sleep() - wake GPIO=0x2d008888
DC30plus[0]: jpeg_codec_sleep() - sleep GPIO=0x2b008888
DC30plus[0]: enable_jpg(IDLE)
DC30plus[0]: VIDIOCSCHAN - channel=0, norm=1
DC30plus[0]: VIDIOCGCHAN - channel=0
DC30plus[0]: VIDIOCGCAP
DC30plus[0]: BUZIOC_G_PARAMS
DC30plus[0]: BUZIOC_S_PARAMS
DC30plus[0]: BUZIOC_REQBUFS - count=64, size=262144
DC30plus[0]: mmap(MJPEG) of 0x2aaaaaaab000-0x2aaaab2ab000 (size=8388608)
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=0
DC30plus[0]: jpeg_codec_sleep() - wake GPIO=0x2f008888
DC30plus[0]: enable_jpg(MOTION_COMPRESS)
DC30plus[0]: jpeg_start
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=1
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=2
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=3
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=4
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=5
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=6
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=7
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=8
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=9
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=10
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=11
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=12
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=13
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=14
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=15
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=16
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=17
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=18
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=19
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=20
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=21
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=22
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=23
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=24
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=25
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=26
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=27
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=28
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=29
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=30
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=31
DC30plus[0]: BUZIOC_SYNC
DC30plus[0]: jpg_sync() - timeout: codec isr=0x1c
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=-1
DC30plus[0]: jpeg_codec_sleep() - wake GPIO=0x2f008888
DC30plus[0]: jpeg_codec_sleep() - sleep GPIO=0x2b008888
DC30plus[0]: enable_jpg(IDLE)
DC30plus[0]: BUZIOC_QBUF_CAPT - frame=-1
DC30plus[0]: jpg_qbuf() - stop streaming but not in streaming mode
DC30plus[0]: munmap(MJPEG)
DC30plus[0]: zoran_close(lavrec, pid=[4099]), users(+)=1
DC30plus[0]: jpeg_codec_sleep() - wake GPIO=0x2f008888
DC30plus[0]: jpeg_codec_sleep() - sleep GPIO=0x2b008888
DC30plus[0]: enable_jpg(IDLE)
DC30plus[0]: interrupts received: queue_state=0/0/2/32: no interrupts detected.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Mjpeg-users mailing list
Mjpeg-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mjpeg-users
