Hallo I don't know but for some reason I made it (misconfigured) that the 2.6.18 kernel did not boot on my machine. I saw that the 2.6.18.1 kernel is aviable. And so I used that kernel for a 2nd try. And this time it seems I did it right. The kernel works and so do the zoran cards.
> Am I loading the right module? lspci says: > 00:09.0 Multimedia video controller: Zoran Corporation ZR36057PQC Video > cutting chipset (rev 01) Basically right. I have on the BUZ and DC30 rev 02. > And the module I load is: > modprobe zr36067 card=1 debug=4 That should work. > Here's what I get in /etc/modutils/video: > alias char-major-81 zr36067 > options zr36067 card=1 > pre-install zr36067 (modprobe saa7110; modprobe adv7175) You also need to load the driver for the zr36060 (after the adv7175). (unless you have a DC10 "old" with the zr36050 and zr36016 on it. > I think I used the zoran module last time I used my zoran card (old > config and old kernel). > > The zoran kernel isn't anymore available in 2.6.18: > modprobe zoran > FATAL: Module zoran not found. The main module was never names zoran in the linux kernel. Because there exists another module for Zoran IC's. It was always called zr36067 auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users
