Bernhard Praschinger wrote: > Hallo > > >> >>> Can you see the recording using either mplayer or aviplay? >> >>> If not, post the lavrec command line you are using. >> >> >> >> I found out that if i use lavrec with the -q option that i get this >> >> grey/black pic. while playing with glav/lavplay (it doesn�t play with >> >> xine/mplayer at all) >> >> If i use lavrec without -q it works, but that�s strange, as i always >> >> used -q before without problems. >> > Which Kernel version did you compile ? >>I have tested it with Kernel 2.6.15.5 and 2.6.16.20 it´s the same for >>both kernels. > > > I work with the 2.6.16.20 kernel, and there with the kernel included > drivers. The BUZ and DC30 work without problems. > > >> > What command do you use ? >> > The -q option should work, it might be that there are problems when you >> > set it to high. >>I used this cmd: >>lavrec -f q -g 768x576 -d 1 -s -c 2 -a 16 test.mov > > > Which version of the libquicktime do you use ?
Currently version 0.9.7 is installed (i have also tested it with version 0.9.8). Same result. > Could you please try a command like that: > lavrec -f a -i p -d 1 -s -a 16 test.avi > > And try once with -f q/a (quciktime/avi to see if the problem is there), > and add in a 2nd step the -q option. I get the same with -f a with and without the -q option. Audio is there but no video. >> > What was the output when lavrec fails ? >>Actually no error message, it stops when i press ctrl-c (as i did always). > > > So "just" the data recorded is usless. When you have used the -q option > which value did you use ? (50-90 for example would be very good choices. I have tested it with 55/60/70. BF. > auf hoffentlich bald, > > Berni the Chaos of Woodquarter > > Email: [EMAIL PROTECTED] > www: http://www.lysator.liu.se/~gz/bernhard > _______________________________________________ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users
