On Mon, 7 Mar 2005 23:44:49 +0000 David Robinson <[EMAIL PROTECTED]> hit the keyboard and punched:
> > Zoran MJPEG board driver version 0.9.5 > > PCI: Found IRQ 11 for device 0000:00:0a.0 > > MJPEG[0]: Zoran ZR36057 (rev 1) irq: 11, memory: 0xefffe000. > > DC30[0]: Changing PCI latency from 64 to 48. > > DC30[0]: Initializing i2c bus... > > DC30[0]: i2c_client_register() - driver id = 42 > > DC30[0]: Initializing videocodec bus... > > DC30[0]: jpeg_codec_sleep() - sleep GPIO=0x81008888 > > DC30[0]: jpeg_codec_sleep() - wake GPIO=0x85008888 > > zr36050: initializing MJPEG subsystem #0. > > zr36050[0]: writing 0x00 to 0x0040 > > zr36050[0]: writing 0x00 to 0x0041 > > zr36050[0]: reading from 0x0040: ff > > zr36050[0]: reading from 0x0041: ff > > zr36050[0]: attach failed, can't connect to jpeg processor! > > zr36050[0]: finished codec #0 > > DC30[0]: find_zr36057() - no codec found > > DC30[0]: i2c_client_unregister() > > No known MJPEG cards found. > > Just giving this a nudge to see if there's any progress or other > things I should be trying. Hi David, I've just finished (somewhat) installing Gentoo on a P3/800Mhz with a Pinnacle/Miro DC30 Plus. Kernel is gentoo-modified 2.6.10. I really don't know much about this, but after a few fiddles and recompiles with the kernel selecting differend modules it all seems to work. I never use "modprobe zoran" or anything like that. I have coldplug installed and starting with default runlevel. Everything just works. Well, works... actually I don't know about that. Haven't really tested it yet, but at least I get the device nodes setup: htpc root # ls -l /dev/video* lr-xr-xr-x 1 root root 6 Mar 8 00:46 /dev/video -> video0 lr-xr-xr-x 1 root root 10 Mar 8 00:26 /dev/video0 -> v4l/video0 htpc root # ls -l /dev/v4l/ total 0 crw-rw---- 1 root video 81, 0 Jan 1 1970 video0 htpc root # Maybe I created the /dev/video symlink myselft for testing purposes, I don't remember. I don't know what I can do to help you? But I'll gladely share any information about setup if you just tell me what to look for :-) To start with, I'll post my dmesg: htpc root # dmesg ommit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names Adding 257032k swap on /dev/hda2. Priority:-1 extents:1 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:09.0: 3Com PCI 3c905C Tornado at 0xe800. Vers LK1.1.19 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Apollo Pro 133 chipset agpgart: Maximum main memory to use for agp memory: 94M agpgart: AGP aperture is 64M @ 0xd0000000 parport_pc: Ignoring new-style parameters in presence of obsolete ones parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] parport_pc: VIA parallel port: io=0x378, irq=7 i2c_adapter i2c-0: registered as adapter #0 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 11 (level, low) -> IRQ 11 PCI: Via IRQ fixup for 0000:00:07.5, from 9 to 11 PCI: Setting latency timer of device 0000:00:07.5 to 64 Linux video capture interface: v1.00 Linux video codec intermediate layer: v0.2 Zoran MJPEG board driver version 0.9.5 ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 5 (level, low) -> IRQ 5 MJPEG[0]: Zoran ZR36067 (rev 2) irq: 5, memory: 0xd9001000 MJPEG[0]: subsystem vendor=0x1031 id=0xd801 i2c-core: driver vpx3220 registered. i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 43 i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 47 i2c-core: driver adv7175 registered. i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 2a i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 2b i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 6a i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 6b i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 43 i2c_adapter i2c-1: master_xfer: with 1 msgs. i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 47 i2c_adapter i2c-1: master_xfer: with 1 msgs. i2c_adapter i2c-1: master_xfer: with 2 msgs. i2c_adapter i2c-1: master_xfer: with 2 msgs. i2c_adapter i2c-1: master_xfer: with 2 msgs. i2c_adapter i2c-1: client [vpx3220a[0]] registered to adapter registering 1-0047 i2c_adapter i2c-1: master_xfer: with 1 msgs. [ _really lots of these messages_ ] i2c_adapter i2c-1: master_xfer: with 1 msgs. i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 2a i2c_adapter i2c-1: master_xfer: with 1 msgs. i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 2b i2c_adapter i2c-1: master_xfer: with 1 msgs. i2c_adapter i2c-1: client [adv7176[0]] registered to adapter registering 1-002b i2c_adapter i2c-1: master_xfer: with 1 msgs. i2c_adapter i2c-1: master_xfer: with 2 msgs. i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 6a i2c_adapter i2c-1: master_xfer: with 1 msgs. i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 6b i2c_adapter i2c-1: master_xfer: with 1 msgs. i2c_adapter i2c-1: registered as adapter #1 ZORAN: 1 card(s) found DC30plus[0]: zr36057_init() - initializing card[0], zr=c9354ac0 i2c_adapter i2c-1: master_xfer: with 1 msgs. i2c_adapter i2c-1: master_xfer: with 1 msgs. ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 2940 Ultra SCSI adapter> aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs (scsi0:A:6): 20.000MB/s transfers (20.000MHz, offset 15) Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 6, lun 0, type 5 htpc root # I've cut out a big bunch of messages like this: i2c_adapter i2c-1: master_xfer: with 1 msgs. Dunno what they are from, maybe I said debug=1 somewhere... lspci maybe? htpc root # lspci 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 1b) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 0e) 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 0e) 0000:00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 20) 0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 21) 0000:00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) 0000:00:0b.0 Multimedia video controller: Zoran Corporation ZR36057PQC Video cutting chipset (rev 02) 0000:00:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U 0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) htpc root # How about an lsmod? htpc root # lsmod Module Size Used by snd_pcm_oss 48804 0 snd_mixer_oss 17792 1 snd_pcm_oss snd_seq_oss 31744 0 snd_seq_midi_event 6016 1 snd_seq_oss snd_seq 47760 4 snd_seq_oss,snd_seq_midi_event aic7xxx 208728 0 zr36016 6024 1 zr36050 9352 1 adv7175 5896 0 vpx3220 7816 0 zr36067 133052 0 videocodec 7444 3 zr36016,zr36050,zr36067 videodev 7552 1 zr36067 snd_via82xx 22944 0 snd_ac97_codec 73440 1 snd_via82xx snd_pcm 83208 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec snd_timer 20484 2 snd_seq,snd_pcm snd_page_alloc 7812 2 snd_via82xx,snd_pcm gameport 3712 1 snd_via82xx snd_mpu401_uart 6144 1 snd_via82xx snd_rawmidi 19360 1 snd_mpu401_uart snd_seq_device 7052 3 snd_seq_oss,snd_seq,snd_rawmidi snd 46180 11 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec, snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device i2c_viapro 6540 0 parport_pc 30404 0 parport 31688 1 parport_pc via_agp 7680 1 agpgart 28456 1 via_agp 3c59x 36392 0 sata_via 5892 0 sata_svw 5252 0 sata_sil 6020 0 sata_promise 7940 0 libata 40068 4 sata_via,sata_svw,sata_sil,sata_promise sbp2 21512 0 ohci1394 31108 0 ieee1394 92980 2 sbp2,ohci1394 ohci_hcd 19208 0 uhci_hcd 30480 0 usb_storage 28160 0 usbhid 30272 0 ehci_hcd 27524 0 usbcore 104440 6 ohci_hcd,uhci_hcd,usb_storage,usbhid,ehci_hcd htpc root # Any my /etc/shadow htpc etc # cat shadow root:$1... just kidding ;-) -- Rickard .--. .--. .----------------------------------------. | | | | .-. | Rickard Borgmäster | | | | |/ / | [EMAIL PROTECTED] | .-^ | .--. | < | http://doktorn.sub.nu/ | ( o | ( () ) | |\ \ `----------------------------------------' `-----' `--' `--' `--' ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users