Hallo > I've been trying to get a Pinnacle Miro DC30 video capture card > working now for over two weeks. I have Googled until my eyeballs hurt, > but cannot find a resolution to my problem. > > As can be seen from the output below, Linux is detecting the card. > However, /dev/video* entries do not get created at boot time. Running > MAKEDEV video creates these but they disappear after a reboot. > > System: > Fedora Core 3 / Linux 2.6.10-1.760_FC3 > Gigabyte GA-6LA7 (440LX chipset) > Celeron 400Mhz / 384MB > Pinnacle Miro DC30 > > modprobe zr36067 card=3 debug=4 produces the following: The zr36067 module should detect the card. What happens when you don't specify a card ? Have you tried using card=4 ?
What output you get when you load the driver in the system log, usually /var/log/messages ? > options zr36067 card=3 > alias char-major-81-0 zr36067 > > lsmod output: > > Module Size Used by > i2c_algo_bit 8393 0 > videocodec 7381 2 zr36016,zr36050 > i2c_core 20801 4 adv7175,vpx3220,i2c_algo_bit,i2c_piix4 The you see that you the zoran driver should also use that modules. So the important driver is not really loaded. > auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users