Dave, As root, run the following command:
modprobe zr36067 This should cause the DC10plus drivers to be loaded. Once the drivers are loaded, /dev/video0 will be created such that xawtv and the mjpeg capture tools should work correctly. The file that you attached to your original message is _not_ a script file. It is actually C source code for the DC10plus drivers. Regards, Wesley -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of dave david Sent: Friday, June 11, 2004 7:05 AM To: [EMAIL PROTECTED] Subject: [Mjpeg-users] newbie trying to set up a pinnacle DC10+ card Hi I have been playing around with Linux for a little while now and have only progressed to setting up apt and using synaptic. which is how I upgraded mjpegtools to 1.6.1.92-1 for fedora core 1 from the ccrma site but I do not seem to be able to use it. By the way I have a pinnacle DC10+ card with zoran 36067pqc, phillips SAA7110A on it. When I check the hardware (using the GUI's hardware browser) under Capture Devices it states ZR36057pqc video cutting chipset and the driver to be ZR36067 I have printed out the article written by Praschinger Bernhard in the article a script is mentioned at /usr/src/driver-zoran however I don't seem to have this but I do have /usr/src/linux-2.4.22-1.21156.nptl/drivers/smedia/video with this in it zr36057.h which I assume is the script however it does nothing when I run it in a terminal (by typing zr36067) I then tried opening xawtv in a terminal and got $xawtv This is xawtv-3.88, running on Linux/i686 (2.4.24-1.ll.rhfc1.ccrma) can't open /dev/video0: No such device v4l2: open /dev/video0: No such device v4l2: open /dev/video0: No such device v4l: open /dev/video0: No such device no video grabber device available at this stage I am starting to wonder if mjpegtools is set up correctly? I noticed today that there is a library called mjpegtools-lib at a different repositary called livna. do I need this as I don't want to mix repositaries Finally my question is how do I test to see if mjpegtools is set up correctly? How do I use the script? Is the attatched file the correct script? I hope you can help me Find local movie times and trailers on Yahoo! Movies. http://au.movies.yahoo.com ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
