Hallo You are not subcribed to the list so you mail was held till a mailinglist admin released it. For further questions pleas subscribe to the mailinglist first, and then post your question. Else it will take again longer time till you get a answer.
> I have been playing around with Linux for a little > while now and have only progressed to setting up apt > and using synaptic. which is how I upgraded > mjpegtools to 1.6.1.92-1 for fedora core 1 from the > ccrma site but I do not seem to be able to use it. > By the way I have a pinnacle DC10+ card with zoran > 36067pqc, phillips SAA7110A on it. > When I check the hardware (using the GUI's hardware > browser) under Capture Devices it states ZR36057pqc > video cutting chipset and the driver to be ZR36067 Which kernel do you use and which zoran driver do you use ? The 2.6.x kernels have a working zoran driver, you can use. You do not need there to get the zoran driver from the mjpeg tools cvs. It could be that fedora has the correct modules built and you only have to load them. > I have printed out the article written by Praschinger > Bernhard in the article a script is mentioned at > /usr/src/driver-zoran however I don't seem to have > this but I do have You only have that directory if you use the driver from the mjpegtools site or CVS. Than you should use the script to load the driver. > /usr/src/linux-2.4.22-1.21156.nptl/drivers/smedia/video > with this in it zr36057.h which I assume is the > script > however it does nothing when I run it in a terminal > (by typing zr36067) > I then tried opening xawtv in a terminal and got Thats just a header file and no script. > at this stage I am starting to wonder if mjpegtools is > set up correctly? No, the driver is not loaded correct. Try as root "modprobe zr36067" that should load the zoran driver, for the card. And try xawtv after that. And attach the output of lsmod and of the messages you get when you try to load the zr36067 kernel module. > I noticed today that there is a library called > mjpegtools-lib at a different repositary called livna. > do I need this as I don't want to mix repositaries No I that one is not needed. At leas I didn't know of that. > Finally my question is how do I test to see if > mjpegtools is set up correctly? > How do I use the script? > Is the attatched file the correct script? The mjpegtools are the stage after the driver. As soon as you see the the video with xawtv you can think about useing the mjpegtools. auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
