Also schrieb Ronald Bultje am 20:39:
>
> You are using a *output Xv port* as input Xv port. The type should read
> "video4linux" and should show your DC10+ or other MJPEG card. You probably
> need to load the XFree86 X/v4l extension, see the README or FAQ on how to
> do that. Make sure yuou load the driver before starting X, else it won't
> detect the v4l device.
In the xf86config-file the v4l-module is loaded.
When I load (as root) the zoran-driver (via the command ./update dc10plus) and
start another X-session, it doesn't help.
I understand that the port will only be identified as soon as I have loaded
the driver? As far as I know it's loaded while booting the system.
When I look at the information I find on the DC10+ (according to my system
it's a Miro, but in fact it's a Pinnacle):
|Driver Info #0:
|Driver Status: buz is not active
|Driver Activation Cmd: "modprobe buz"
But there's no 'buz' on my system (I searched for it).
According to the 'Hardware-Info', the module is not active, since 'buz' isn't
loaded.
Never read anything about 'buz' But when I look at Google, it seems that it
should be 'zoran' instead.
So, how to proceed now?
Zarathustra.
--
¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø
* My Box said: "Install WinXP or better ..."
So I installed Linux. *
¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø
System: P4-2,4GHz, 512MB. OS: SuSE 9.0, Kernel: 2.4.21
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
Mjpeg-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/mjpeg-users
