On Tue, Dec 28, 2010 at 6:47 PM, Mike Larkin <mlar...@azathoth.net> wrote: > On Tue, Dec 28, 2010 at 06:42:12PM -0800, Mike Larkin wrote: >> On Mon, Dec 27, 2010 at 12:18:56PM -0800, patrick keshishian wrote: >> > Hi, >> > >> > I am having a few issues with this laptop including not being able to >> > make it sleep/suspend and/or wake up. Who are the right (interested) >> > people I should/can send acpidump to? Anything else I should include? >> > >> > zzz will seemingly attempt to suspend the box. But it doesn't fully >> > finish (I assume) leaving the display screen on, but at this point the >> > box is hung. Can't ssh to it or ping it. I think caps-lock will toggle >> > on/off the caps-lock light, but nothing else responds. Only choice is >> > to hold down the power button for 4 seconds for a hard restart. >> >> Edit sys/dev/acpi.c, search for pci_dopm. Change the assignment from >> 1 to 0 and rebuild your kernel. >> > > er. That was supposed to read /sys/dev/acpi/acpi.c
That seems to have done the trick! So what does this mean? I now see your check-in comment (dev/pci/ppb.c -r1.46), but question that comes to mind is whether this variable should be toggle-able at run time? Thanks, --patrick > >> -ml >> >> > >> > Also, the built-in weefee card will hang the box on `ifconfig athn0 scan`. >> > >> > Thanks, >> > --patrick >> > >> > >> > >> > OpenBSD 4.8-current (GENERIC) #379: Tue Dec 21 19:17:45 MST 2010 >> > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC >> > real mem = 1876754432 (1789MB) >> > avail mem = 1812852736 (1728MB) >> > mainbus0 at root >> > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf10d0 (17 entries) >> > bios0: vendor Phoenix Technologies LTD version "v1.3201" date 06/18/2009 >> > bios0: Gateway LT31 >> > acpi0 at bios0: rev 2 >> > acpi0: sleep states S0 S3 S4 S5 >> > acpi0: tables DSDT FACP APIC MCFG HPET BOOT SLIC >> > acpi0: wakeup devices PB5_(S5) OHC1(S3) OHC2(S3) EHCI(S3) HDAU(S3) >> > acpitimer0 at acpi0: 3579545 Hz, 32 bits >> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> > cpu0 at mainbus0: apid 0 (boot processor) >> > cpu0: AMD Athlon(tm) Processor L110, 1197.21 MHz >> > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,MMX,FXSR,SSE,SSE2,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW >> > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB >> > 64b/line 16-way L2 cache >> > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative >> > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative >> > cpu0: apic clock running at 199MHz >> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 21, 24 pins >> > acpihpet0 at acpi0: 14318180 Hz >> > acpiprt0 at acpi0: bus 0 (PCI0) >> > acpiprt1 at acpi0: bus -1 (PB3_) >> > acpiprt2 at acpi0: bus -1 (PB4_) >> > acpiprt3 at acpi0: bus 3 (PB5_) >> > acpiprt4 at acpi0: bus 4 (PB6_) >> > acpiprt5 at acpi0: bus -1 (PB7_) >> > acpiprt6 at acpi0: bus 9 (P2P_) >> > acpiprt7 at acpi0: bus 1 (AGP_) >> > acpiec0 at acpi0 >> > acpicpu0 at acpi0: C3, C2 >> > acpitz0 at acpi0: critical temperature 100 degC >> > acpiac0 at acpi0: AC unit offline >> > acpibat0 at acpi0: BAT1 model "UM09B44" serial 210 type LION oem "SONY" >> > acpibtn0 at acpi0: LID_ >> > acpibtn1 at acpi0: SLPB >> > acpibtn2 at acpi0: PWRB >> > acpivideo0 at acpi0: VGA_ >> > acpivout0 at acpivideo0: LCD_ >> > acpivout1 at acpivideo0: CRT1 >> > acpivout2 at acpivideo0: TV__ >> > acpivout3 at acpivideo0: DFP1 >> > pci0 at mainbus0 bus 0 >> > pchb0 at pci0 dev 0 function 0 "ATI RS690 Host" rev 0x00 >> > ppb0 at pci0 dev 1 function 0 "ATI RS690 PCIE" rev 0x00 >> > pci1 at ppb0 bus 1 >> > vga1 at pci1 dev 5 function 0 "ATI Radeon X1250 IGP" rev 0x00 >> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> > ppb1 at pci0 dev 5 function 0 "ATI RS690 PCIE" rev 0x00 >> > pci2 at ppb1 bus 3 >> > re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL >> > (0x2480), apic 1 int 17 (irq 5), address 00:23:8b:ef:3a:a7 >> > rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 >> > ppb2 at pci0 dev 6 function 0 "ATI RS690 PCIE" rev 0x00 >> > pci3 at ppb2 bus 4 >> > athn0 at pci3 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 1 int >> > 18 (irq 11), address 00:26:5e:0f:bc:3a >> > athn0: AR9285 rev 2 (1T1R), ROM rev 13 >> > ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 1 int >> > 22 (irq 11), AHCI 1.1 >> > scsibus0 at ahci0: 32 targets >> > sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK2555GS, FG00> SCSI3 0/direct fixed >> > sd0: 238475MB, 512 bytes/sec, 488397168 sec total >> > ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 1 int >> > 16 (irq 10), version 1.0, legacy support >> > ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 1 int >> > 17 (irq 5), version 1.0, legacy support >> > ohci2 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 1 int >> > 17 (irq 5), version 1.0, legacy support >> > ohci3 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 1 int >> > 18 (irq 11), version 1.0, legacy support >> > ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 1 int >> > 19 (irq 11) >> > usb0 at ehci0: USB revision 2.0 >> > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 >> > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x14: SMI >> > iic0 at piixpm0 >> > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM >> > pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA, >> > channel 0 configured to compatibility, channel 1 configured to >> > compatibility >> > azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic >> > 1 int 16 (irq 10) >> > azalia0: codecs: Realtek ALC272 >> > audio0 at azalia0 >> > pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00 >> > ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 >> > pci4 at ppb3 bus 9 >> > pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 >> > pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 >> > pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 >> > kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: >> > core rev DH-G2 >> > usb1 at ohci0: USB revision 1.0 >> > uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >> > usb2 at ohci1: USB revision 1.0 >> > uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >> > usb3 at ohci2: USB revision 1.0 >> > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >> > usb4 at ohci3: USB revision 1.0 >> > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >> > isa0 at pcib0 >> > isadma0 at isa0 >> > pckbc0 at isa0 port 0x60/5 >> > pckbd0 at pckbc0 (kbd slot) >> > pckbc0: using irq 1 for kbd slot >> > wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> > pms0 at pckbc0 (aux slot) >> > pckbc0: using irq 12 for aux slot >> > wsmouse0 at pms0 mux 0 >> > pcppi0 at isa0 port 0x61 >> > spkr0 at pcppi0 >> > mtrr: Pentium Pro MTRR support >> > uvideo0 at uhub0 port 4 configuration 1 interface 0 "Chicony >> > Electronics Co., Ltd. CNF9011" rev 2.00/13.57 addr 2 >> > video0 at uvideo0 >> > vscsi0 at root >> > scsibus1 at vscsi0: 256 targets >> > softraid0 at root >> > root on sd0a swap on sd0b dump on sd0b
