Hi,
I am having a few issues with this laptop including not being able to
make it sleep/suspend and/or wake up. Who are the right (interested)
people I should/can send acpidump to? Anything else I should include?
zzz will seemingly attempt to suspend the box. But it doesn't fully
finish (I assume) leaving the display screen on, but at this point the
box is hung. Can't ssh to it or ping it. I think caps-lock will toggle
on/off the caps-lock light, but nothing else responds. Only choice is
to hold down the power button for 4 seconds for a hard restart.
Also, the built-in weefee card will hang the box on `ifconfig athn0 scan`.
Thanks,
--patrick
OpenBSD 4.8-current (GENERIC) #379: Tue Dec 21 19:17:45 MST 2010
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1876754432 (1789MB)
avail mem = 1812852736 (1728MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf10d0 (17 entries)
bios0: vendor Phoenix Technologies LTD version "v1.3201" date 06/18/2009
bios0: Gateway LT31
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET BOOT SLIC
acpi0: wakeup devices PB5_(S5) OHC1(S3) OHC2(S3) EHCI(S3) HDAU(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) Processor L110, 1197.21 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 21, 24 pins
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB3_)
acpiprt2 at acpi0: bus -1 (PB4_)
acpiprt3 at acpi0: bus 3 (PB5_)
acpiprt4 at acpi0: bus 4 (PB6_)
acpiprt5 at acpi0: bus -1 (PB7_)
acpiprt6 at acpi0: bus 9 (P2P_)
acpiprt7 at acpi0: bus 1 (AGP_)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 100 degC
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT1 model "UM09B44" serial 210 type LION oem "SONY"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivout1 at acpivideo0: CRT1
acpivout2 at acpivideo0: TV__
acpivout3 at acpivideo0: DFP1
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI RS690 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "ATI RS690 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon X1250 IGP" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 5 function 0 "ATI RS690 PCIE" rev 0x00
pci2 at ppb1 bus 3
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL
(0x2480), apic 1 int 17 (irq 5), address 00:23:8b:ef:3a:a7
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 6 function 0 "ATI RS690 PCIE" rev 0x00
pci3 at ppb2 bus 4
athn0 at pci3 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 1 int
18 (irq 11), address 00:26:5e:0f:bc:3a
athn0: AR9285 rev 2 (1T1R), ROM rev 13
ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 1 int
22 (irq 11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK2555GS, FG00> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 1 int
16 (irq 10), version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 1 int
17 (irq 5), version 1.0, legacy support
ohci2 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 1 int
17 (irq 5), version 1.0, legacy support
ohci3 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 1 int
18 (irq 11), version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 1 int
19 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x14: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic
1 int 16 (irq 10)
azalia0: codecs: Realtek ALC272
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci4 at ppb3 bus 9
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00:
core rev DH-G2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Chicony
Electronics Co., Ltd. CNF9011" rev 2.00/13.57 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
