Already recompiled the kernel and the whole userland approximately three
weeks ago on the patch/stable branch. It didn't fix the issue.
No further kernel patches have been released since then
(the last is 004: RELIABILITY FIX: November 17, 2010). :(

I hope a solution would come up soon, I really like my OpenBSD AP.



On Wed, 2010-12-15 at 16:58 +0100, Peter Hessler wrote:
> did you test 4.8-stable?
> 
> or any of the patches already issued for 4.8?
> 
> 
> On 2010 Dec 15 (Wed) at 14:55:54 +0100 (+0100), Snoop wrote:
> :Perfect!
> :The answer is yes, it's also an NFS server, probably not for long but at
> :the present time yes.
> :Anyway, you're the second person that confirms the correct functionality
> :of the ral as an AP on the 4.8-CURRENT (the first that I found was
> :Stephen Biggs on Tue, 2010-11-30 at 03:33). I'm wondering if they're
> :planning to release a small patch on the patch branch to fix this. I
> :would avoid to switch to the current one that, BTW, wouldn't be much
> :worse than to wait another 5 months for the new release.
> :
> :I would really avoid to do so but I'm seriously considering to downgrade
> :the AP to the previous release (4.7) or to rely on a commercial
> :solution.
> :
> :On Wed, 2010-12-15 at 14:08 +0100, Michael wrote:
> :> Am 15.12.2010 12:38, schrieb Snoop:
> :> > Hi everybody.
> :> > Sorry to re-post this issue but nobody replied and I don't think me and 
> S. Biggs are the only one experiencing this issue.
> :> > 
> :> > I'm experiencing the same problem Stephen has (described below). I was 
> looking for a solution on the
> :> > web but I'd say unsuccessfully. I couldn't found any reply to his
> :> > complaint (the one posted by S. Biggs is in fact the only one I've found 
> around).
> :> > Here's my pcidump -v output related to the wireless AP:
> :> >  5:4:0: Ralink RT2561S
> :> >         0x0000: Vendor ID: 1814 Product ID: 0301
> :> >         0x0004: Command: 0107 Status ID: 0410
> :> >         0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 00
> :> >         0x000c: BIST: 00 Header Type: 00 Latency Timer: 42 Cache Line 
> Size: 10
> :> >         0x0010: BAR mem 32bit addr: 0xf8510000
> :> >         0x0014: BAR empty (00000000)
> :> >         0x0018: BAR empty (00000000)
> :> >         0x001c: BAR empty (00000000)
> :> >         0x0020: BAR empty (00000000)
> :> >         0x0024: BAR empty (00000000)
> :> >         0x0028: Cardbus CIS: 00000601
> :> >         0x002c: Subsystem Vendor ID: 1432 Product ID: 7128
> :> >         0x0030: Expansion ROM Base Address: 00000000
> :> >         0x0038: 00000000
> :> >         0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00
> :> >         0x0040: Capability 0x01: Power Management
> :> > 
> :> > Everything's running on OpenBSD 4.8 RELEASE.
> :> > Thanks in advance, any tip/direction is more than welcome.
> :> 
> :> I got 4.8-current on my access point and it is works just fine.
> :> 
> :> If that box of yours also is a NFS client using TCP, don't update,
> :> because thats more or less broken right now. :-(
> :> 
> :
> :
> : 
> : 
> : --
> : Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP 
> autenticato? GRATIS solo con Email.it http://www.email.it/f
> : 
> : Sponsor:
> : Vuoi farti o vuoi fare un regalo originale? Visita MisterCupido.com e 
> personalizza con foto: quadri, tazze, puzzle, cuscini, magliette, peluche, 
> borse, portachiavi...
> : Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=11025&d=15-12
> :

Reply via email to