On 2010-11-09 18:00, Nick Holland wrote:
> On 11/09/10 10:37, Leslie Jensen wrote:
> ...
>> Now I want to make an installation on a USB stick using the amd64
>> installation CD.
> ...
>> Then comes the question of installation media and the choices are ftp
>> http or done.
>>
>> I can do the installation via http so I'm ok. But I am wondering how do
>> I do in order to find the CD-rom drive. My plan is to install OpenBSD on
>> this machine in the future.
>
> booting from the CD is handled by the system BIOS, OpenBSD doesn't need
> to know how to access the CD to boot, as it isn't running at this point.
> Installing from the CD requires that OpenBSD be able to access the disk.
>
> It seems, for unknown reasons, there's something odd about your
> computer, and OpenBSD is not recognizing the CDROM.
>
> Install via network as you propose, then post the dmesg output,
> hopefully we can figure out where your CDROM is hiding and why it won't
> come out and play. As the CD and the disk system share the same
> interface, I wonder if your disk is going to be recognized at this point.
>
> Nick.
This is what I've done! Boot from USB stick with hard drive present,
both i386 and amd64.
Issued command dmesg; sysctl hw.sensors >> "dmesg_file_name.txt"
I noticed that the dmesg info did not make it to the file so I also did
dmesg >> "dmesg_file_name.txt"
After that I booted FreeBSD and did
dmesg >> "dmesg_file_name.txt"
The files are attached, if you need more info, let me know.
Thanks
/Leslie
hw.sensors.cpu0.temp0=39.00 degC
hw.sensors.cpu1.temp0=39.00 degC
hw.sensors.acpitz0.temp0=44.50 degC (zone temperature)
hw.sensors.acpiac0.indicator0=On (power supply)
OpenBSD 4.8 (GENERIC.MP) #335: Mon Aug 16 09:09:20 MDT 2010
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3744780288 (3571MB)
avail mem = 3631280128 (3463MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf6530 (57 entries)
bios0: vendor Dell Inc. version "A24" date 08/19/2010
bios0: Dell Inc. Latitude E6500
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET DMAR APIC ASF! MCFG TCPA SLIC SSDT
acpi0: wakeup devices PCI0(S4) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) USB4(S0)
USB5(S0) USB6(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S4) RP02(S4) RP03(S4)
RP04(S3) RP05(S3) RP06(S5) LID_(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz, 2527.40 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz, 2527.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu1: 6MB 64b/line 16-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 3 (PCIE)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 11 (RP01)
acpiprt3 at acpi0: bus 12 (RP02)
acpiprt4 at acpi0: bus 13 (RP03)
acpiprt5 at acpi0: bus 14 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 107 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: CRT_
acpivout1 at acpivideo0: LCD_
acpivout2 at acpivideo0: DVI_
acpivout3 at acpivideo0: DVI2
acpivout4 at acpivideo0: DP__
acpivout5 at acpivideo0: DP2_
acpivideo1 at acpi0: VID_
acpivout6 at acpivideo1: CRT_
acpivout7 at acpivideo1: LCD_
acpivout8 at acpivideo1: DP__
acpivout9 at acpivideo1: DP2_
acpivout10 at acpivideo1: DVI_
acpivout11 at acpivideo1: DVI2
acpivideo2 at acpi0: VID2
cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2535, 2534, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 2 int 16 (irq 0)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA Quadro NVS 160m" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 2 int 22
(irq 11), address 00:21:70:a9:4a:12
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20 (irq
10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 (irq
3)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22 (irq
11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 22 (irq
11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 2 int
21 (irq 3)
azalia0: codecs: IDT 92HD71B7
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2 int 16 (irq
0)
pci2 at ppb1 bus 11
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 2 int 17 (irq
0)
pci3 at ppb2 bus 12
iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: apic 2 int 17
(irq 10), MIMO 3T3R, MoW, address 00:16:ea:61:01:e8
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 2 int 18 (irq
0)
pci4 at ppb3 bus 13
ppb4 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 2 int 19 (irq
0)
pci5 at ppb4 bus 14
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20 (irq
10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 (irq
3)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22 (irq
11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20 (irq
10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 3
cbb0 at pci6 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2 int 19
(irq 10)
"Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 1 function 1 not configured
sdhc0 at pci6 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2 int 18
(irq 11)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x11 at pci6 dev 1 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 2 "Intel 82081HBM RAID" rev 0x03: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 19 (irq 10) for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 17
(irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
com2 at pcmcia0 function 0 "Quatech Inc, RS-232 Serial Port PC Card, SSP-100"
port 0xa2f8/8: ti16750, 64 byte fifo
com2: probed fifo depth: 16 bytes
umass0 at uhub1 port 2 configuration 1 interface 0 "Kingston DataTraveler 2.0"
rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 0/direct
removable
sd0: 959MB, 512 bytes/sec, 1965056 sec total
ugen0 at uhub4 port 1 "Broadcom Corp 5880" rev 1.10/1.01 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/5.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/5.00 addr 2
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #0: Mon Jul 19 02:36:49 UTC 2010
r...@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz (2527.01-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4099981312 (3910 MB)
ACPI APIC Table: <DELL M09 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL M09 > on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of 100000, df34d400 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x930,0x934 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem
0xf5000000-0xf5ffffff,0xe0000000-0xefffffff,0xf2000000-0xf3ffffff irq 16 at
device 0.0 on pci1
acpi_video0: <ACPI video extension> on vgapci0
em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0xefe0-0xefff mem
0xf6fe0000-0xf6ffffff,0xf6fdb000-0xf6fdbfff irq 22 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:21:70:a9:4a:12
uhci0: <Intel 82801I (ICH9) USB controller> port 0x6f60-0x6f7f irq 20 at device
26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x6f80-0x6f9f irq 21 at device
26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x6fa0-0x6fbf irq 22 at device
26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfed1c400-0xfed1c7ff irq
22 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
hdac0: <Intel 82801I High Definition Audio Controller> mem
0xf6fdc000-0xf6fdffff irq 21 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib3
iwn0: <Intel(R) PRO/Wireless 5300> mem 0xf1ffe000-0xf1ffffff irq 17 at device
0.0 on pci12
iwn0: MIMO 3T3R, MoW, address 00:16:ea:61:01:e8
iwn0: [ITHREAD]
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci13: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci14: <ACPI PCI bus> on pcib5
uhci3: <Intel 82801I (ICH9) USB controller> port 0x6f00-0x6f1f irq 20 at device
29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x6f20-0x6f3f irq 21 at device
29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x6f40-0x6f5f irq 22 at device
29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfed1c000-0xfed1c3ff irq
20 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib6
cbb0: <RF5C476 PCI-CardBus Bridge> irq 19 at device 1.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
cbb0: Bad Vcc requested
fwohci0: <1394 Open Host Controller Interface> mem 0xf1bff800-0xf1bfffff irq 17
at device 1.1 on pci3
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 36:4f:c0:00:3b:49:70:70
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x2534000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 36:4f:c0:49:70:70
fwe0: Ethernet address: 36:4f:c0:49:70:70
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 36:4f:c0:00:3b:49:70:70 @ 0xfffe00000000, S400, maxrec
2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pci3: <base peripheral, SD host controller> at device 1.2 (no driver attached)
pci3: <base peripheral> at device 1.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M SATA300 controller> port
0x6e70-0x6e77,0x6e78-0x6e7b,0x6e80-0x6e87,0x6e88-0x6e8b,0x6ea0-0x6ebf mem
0xfed1c800-0xfed1cfff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 4> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 5> on atapci0
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xce7ff,0xce800-0xd37ff,0xd3800-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x100 offMax=0x3c9
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ad4: 476940MB <Seagate ST9500420ASG 0002SDM1> at ata2-master UDMA100 SATA 3Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
acd0: DVDR <PLDS DVD+/-RW DU-8A2S/4D13> at ata3-master UDMA100 SATA 1.5Gb/s
hdac0: HDA Codec #0: IDT 92HD71B7
pcm0: <HDA IDT 92HD71B7 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA IDT 92HD71B7 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA IDT 92HD71B7 PCM #2 Digital> at cad 0 nid 1 on hdac0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata3:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata3:0:0:0): CAM status: SCSI Status Error
(probe0:ata3:0:0:0): SCSI status: Check Condition
(probe0:ata3:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray
closed)
SMP: AP CPU #1 Launched!
cd0 at ata3 bus 0 scbus1 target 0 lun 0
cd0: <PLDS DVD+-RW DU-8A2S 4D13> Removable CD-ROM SCSI-0 device
cd0: 100.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
Trying to mount root from ufs:/dev/ad4s3a
usb_alloc_device: set address 2 failed (USB_ERR_STALLED, ignored)
usb_alloc_device: getting device descriptor at addr 2 failed, USB_ERR_STALLED
ugen2.2: <Broadcom Corp> at usbus2
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored)
usbd_req_re_enumerate: getting device descriptor at addr 2 failed,
USB_ERR_STALLED
vboxnet0: Ethernet address: 0a:00:27:00:00:00
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored)
usbd_req_re_enumerate: getting device descriptor at addr 2 failed,
USB_ERR_STALLED
ugen4.2: <(null)> at usbus4 (disconnected)
uhub_reattach_port: could not allocate new device
wlan0: Ethernet address: 00:16:ea:61:01:e8
hw.sensors.acpitz0.temp0=45.50 degC (zone temperature)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.cpu0.temp0=38.00 degC
OpenBSD 4.8 (GENERIC.MP) #359: Mon Aug 16 09:16:26 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz ("GenuineIntel" 686-class)
2.53 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
real mem = 3745382400 (3571MB)
avail mem = 3674144768 (3503MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/19/10, BIOS32 rev. 0 @ 0xffa10, SMBIOS
rev. 2.4 @ 0xf6530 (57 entries)
bios0: vendor Dell Inc. version "A24" date 08/19/2010
bios0: Dell Inc. Latitude E6500
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET DMAR APIC ASF! MCFG TCPA SLIC SSDT
acpi0: wakeup devices PCI0(S4) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) USB4(S0)
USB5(S0) USB6(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S4) RP02(S4) RP03(S4)
RP04(S3) RP05(S3) RP06(S5) LID_(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz ("GenuineIntel" 686-class)
2.53 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 3 (PCIE)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 11 (RP01)
acpiprt3 at acpi0: bus 12 (RP02)
acpiprt4 at acpi0: bus 13 (RP03)
acpiprt5 at acpi0: bus 14 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 107 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: CRT_
acpivout1 at acpivideo0: LCD_
acpivout2 at acpivideo0: DVI_
acpivout3 at acpivideo0: DVI2
acpivout4 at acpivideo0: DP__
acpivout5 at acpivideo0: DP2_
acpivideo1 at acpi0: VID_
acpivout6 at acpivideo1: CRT_
acpivout7 at acpivideo1: LCD_
acpivout8 at acpivideo1: DP__
acpivout9 at acpivideo1: DP2_
acpivout10 at acpivideo1: DVI_
acpivout11 at acpivideo1: DVI2
acpivideo2 at acpi0: VID2
bios0: ROM list: 0xc0000/0xe800 0xce800/0x5000 0xd3800/0x800
cpu0: Enhanced SpeedStep 2528 MHz: speeds: 2535, 2534, 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 2 int 16 (irq 0)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA Quadro NVS 160m" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 2 int 22
(irq 11), address 00:21:70:a9:4a:12
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20 (irq
10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 (irq
3)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22 (irq
11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 22 (irq
11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 2 int
21 (irq 3)
azalia0: codecs: IDT 92HD71B7
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2 int 16 (irq
0)
pci2 at ppb1 bus 11
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 2 int 17 (irq
0)
pci3 at ppb2 bus 12
iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: apic 2 int 17
(irq 10), MIMO 3T3R, MoW, address 00:16:ea:61:01:e8
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 2 int 18 (irq
0)
pci4 at ppb3 bus 13
ppb4 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 2 int 19 (irq
0)
pci5 at ppb4 bus 14
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20 (irq
10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 (irq
3)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22 (irq
11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20 (irq
10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 3
cbb0 at pci6 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2 int 19
(irq 10)
"Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 1 function 1 not configured
sdhc0 at pci6 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2 int 18
(irq 11)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x11 at pci6 dev 1 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 2 "Intel 82081HBM RAID" rev 0x03: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 19 (irq 10) for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 17
(irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
com3 at pcmcia0 function 0 "Quatech Inc, RS-232 Serial Port PC Card, SSP-100"
port 0xa2f8/8: ti16750, 64 byte fifo
com3: probed fifo depth: 16 bytes
umass0 at uhub1 port 2 configuration 1 interface 0 "Kingston DataTraveler 2.0"
rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI0 0/direct
removable
sd0: 980MB, 512 bytes/sec, 2007040 sec total
ugen0 at uhub4 port 1 "Broadcom Corp 5880" rev 1.10/1.01 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/5.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/5.00 addr 2
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
