On Thu, Oct 28, 2010 at 09:07:14AM -0200, Shazaum wrote:
> this:
>
> inputs.dac-0:1_mute=off [ off on ]
> inputs.dac-2:3_mute=off [ off on ]
> inputs.dig-dac-0:1_mut=off [ off on ]
> record.adc-0:1_source=mic [ mic cd mix2 ]
> record.adc-0:1_mute=off [ off on ]
> record.adc-0:1=114,114
> outputs.line_boost=off [ off on ]
> outputs.mic_source=mix5 [ mix5 ]
> outputs.mic_dir=input-vr50 [ none output input input-vr50 ]
> outputs.SPDIF_source=dig-dac-0:1 [ dig-dac-0:1 ]
> inputs.mix_source=mic { mic }
> outputs.mix2_mute=off [ off on ]
> outputs.mix2=126,126
> inputs.mix2_source=cd,mix { cd mix }
> inputs.mix2_cd=121,121
> inputs.mix2_mix=121,121
> inputs.line_source=dac-0:1,mix2 { dac-0:1 mix2 }
> inputs.mix5_source=dac-2:3,mix2 { dac-2:3 mix2 }
> inputs.mix6_source=mix2 { mix2 }
> inputs.beep_mute=off [ off on ]
> inputs.beep=119
> outputs.master=0,0
> outputs.master.mute=off [ off on ]
> outputs.master.slaves=dac-0:1 { dac-0:1 dac-2:3 dig-dac-0:1 mix2 beep }
> record.volume=114,114
> record.volume.mute=off [ off on ]
> record.volume.slaves=adc-0:1 { adc-0:1 }
> outputs.mode=analog [ analog digital ]
so,
> inputs.dac-0:1_mute=off [ off on ]
> inputs.line_source=dac-0:1,mix2 { dac-0:1 mix2 }
your line-out is connected directly to your first dac, and you don't
have any volume control for the dac.
> outputs.line_boost=off [ off on ]
maybe you need to set this to on? sometimes it has an effect, sometimes
it doesn't.
if that doesn't work, either you're playing something that is simply
not loud enough to hear, or your codec nodes aren't correctly labeled.
if the latter, maybe a bios update would fix it, maybe not.
>
> or
> this
>
> outputs.line_boost=off [ off on ]
> outputs.mic_source=mix5 [ mix5 ]
> outputs.mic_dir=input-vr50 [ none output input input-vr50 ]
> outputs.SPDIF_source=dig-dac-0:1 [ dig-dac-0:1 ]
> outputs.mix2_mute=off [ off on ]
> outputs.mix2=126,126
> outputs.master=0,0
> outputs.master.mute=off [ off on ]
> outputs.master.slaves=dac-0:1 { dac-0:1 dac-2:3 dig-dac-0:1 mix2 beep }
> outputs.mode=analog [ analog digital ]
since both the controls that affect your dac output are labeled 'inputs',
this is a great example of why only looking at 'outputs' is simply wrong.
>
>
> --
>
> Renato dos Santos
> shazaum.wordpress.com
>
>
>
> On 27 October 2010 14:33, Jacob Meuser <jake...@sdf.lonestar.org> wrote:
>
> > On Wed, Oct 27, 2010 at 01:20:20PM -0200, Shazaum wrote:
> > > but this is the GENERIC, debug the azalia was active in the prime
> > > --
> > >
> > > Renato dos Santos
> > > shazaum.wordpress.com
> > >
> > >
> > >
> > > On 27 October 2010 11:10, Jacob Meuser <jake...@sdf.lonestar.org> wrote:
> > >
> > > > I would prefer to just see mixerctl -v output from -current GENERIC.
> > ^^^^^^^^
> >
> > things have changed since 4.7, and the problem may have already been fixed.
> >
> > also, I want to see mixerctl -v output as it is a boot, before you do
> > anything else with mixerctl.
> >
> > > >
> > > > --
> > > > jake...@sdf.lonestar.org
> > > > SDF Public Access UNIX System - http://sdf.lonestar.org
> >
> > --
> > jake...@sdf.lonestar.org
> > SDF Public Access UNIX System - http://sdf.lonestar.org
--
jake...@sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org
