On Jun 20 08:59:53, Jan Stary wrote:
> On Jun 19 08:49:26, jor...@peereboom.us wrote:
> > Can you try this patch to see if it helps on your HP systems?
> >
> > ? acpipci.diff
> > ? acpitz.c.fix
> > ? condref
> > ? msg
> > ? passive.diff
> > ? tzdiff
> > ? xdiff
> > Index: dsdt.c
> > ===================================================================
> > RCS file: /cvs/src/sys/dev/acpi/dsdt.c,v
> > retrieving revision 1.157
> > diff -u -p -u -p -b -r1.157 dsdt.c
> > --- dsdt.c 5 Dec 2009 02:38:11 -0000 1.157
> > +++ dsdt.c 19 Jun 2010 03:10:08 -0000
> > @@ -699,6 +699,11 @@ aml_delchildren(struct aml_node *node)
> >
> > aml_delchildren(onode);
> >
> > + if (onode->value && onode->value->refcnt > 1) {
> > + printf("MULTI: %s\n", aml_nodename(onode));
> > + onode->value->node = NULL;
> > + }
> > +
> > /* Decrease reference count */
> > aml_xdelref(&onode->value, "");
> >
> > @@ -976,6 +981,9 @@ aml_copyvalue(struct aml_value *lhs, str
> > break;
> > case AML_OBJTYPE_OBJREF:
> > lhs->v_objref = rhs->v_objref;
> > + aml_xaddref(lhs->v_objref.ref, "");
> > + printf("copy objref: %x %s\n", lhs->v_objref.type,
> > + aml_nodename(lhs->v_objref.ref->node));
> > break;
> > default:
> > printf("copyvalue: %x", rhs->type);
> > @@ -3626,11 +3634,11 @@ aml_xparse(struct aml_scope *scope, int
> > /* CondRef: rr => I */
> > ival = 0;
> > if (opargs[0]->node != NULL) {
> > - aml_freevalue(opargs[1]);
> > -
> > /* Create Object Reference */
> > - _aml_setvalue(opargs[1], AML_OBJTYPE_OBJREF, opcode,
> > opargs[0]);
> > - aml_xaddref(opargs[1], "CondRef");
> > + opargs[2] = aml_allocvalue(AML_OBJTYPE_OBJREF, opcode,
> > + opargs[0]);
> > + aml_xaddref(opargs[0], "CondRef");
> > + aml_xstore(scope, opargs[1], 0, opargs[2]);
> >
> > /* Mark that we found it */
> > ival = -1;
>
>
> This makes GENERIC.MP boot and run fine on my HP8530w.
> (Previously, I had to 'disable acpi' or at least 'disable acpiec' to boot.)
>
> I am running 'apmd -A'; the processor frequency scales as it should,
> battery life, AC status etc are reported correctly. Plugging the AC
> in and out makes the screen brighten and dim, respectively.
>
> None of 'apm -S', 'apm -z' or 'zzz' does nothing though.
Forgot the dmesg:
OpenBSD 4.7-beta (GENERIC.MP) #1: Sun Jun 20 08:43:57 CEST 2010
r...@hp.stare.cz:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error bb<clock_battery,config_unit,memory_size,fixed_disk>
cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class)
2.53 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem = 2125561856 (2027MB)
avail mem = 2050760704 (1955MB)
RTC BIOS diagnostic error bb<clock_battery,config_unit,memory_size,fixed_disk>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/10/08, SMBIOS rev. 2.4 @ 0x7edc4000
(21 entries)
bios0: vendor Hewlett-Packard version "68PDV Ver. F.06" date 12/15/2008
bios0: Hewlett-Packard HP EliteBook 8530w
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SLIC SSDT DMAR ASF! SSDT SSDT
SSDT
acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5)
RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class)
2.53 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
copy objref: 5b12 \\_OSI
copy objref: 5b12 \\_OSI
acpiprt0 at acpi0: bus 1 (PEGP)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus 3 (RP02)
acpiprt3 at acpi0: bus 4 (RP03)
acpiprt4 at acpi0: bus 69 (RP05)
acpiprt5 at acpi0: bus 134 (PCIB)
acpiprt6 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0MULTI: \\_PR_.CPU0.COSC.UID0
MULTI: \\_PR_.CPU0.COSC.UID0
: C2, C1, PSS
acpicpu1 at acpi0MULTI: \\_PR_.CPU0.COSC.UID0
MULTI: \\_PR_.CPU0.COSC.UID0
: C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpipwrres3 at acpi0: PGF0
acpitz0 at acpi0: critical temperature 115 degC
acpitz1 at acpi0: critical temperature 105 degC
acpitz2 at acpi0: critical temperature 112 degC
acpitz3 at acpi0: critical temperature 112 degC
acpitz4 at acpi0: critical temperature 90 degC
acpitz5 at acpi0: critical temperature 112 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 00903 2009/01/13 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
copy objref: 5b12 \\_SB_.PCI0.PEGP.DGFX.PDOS
acpivout0 at acpivideo0: LCD_
acpivout1 at acpivideo0: CRT_
acpivout2 at acpivideo0: DVI_
acpivout3 at acpivideo0: DD04
bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000 0xcf800/0x1000
cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2534, 2533, 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16 (irq 10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x065c rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 int 22
(irq 10), address 00:23:7d:e7:ac:60
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 (irq
10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 (irq
10)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq
11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq
10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 int
17 (irq 10)
azalia0: codecs: Analog Devices AD1984A, AT&T/Lucent/0x1040, using Analog
Devices AD1984A
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq
10)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17 (irq
10)
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: apic 1 int 17
(irq 10), MIMO 3T3R, MoW, address 00:21:6a:0f:b2:8e
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18 (irq
11)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq
10)
pci5 at ppb4 bus 69
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq
10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22 (irq
10)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq
11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq
10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 134
"Ricoh 5C832 Firewire" rev 0x06 at pci6 dev 9 function 0 not configured
sdhc0 at pci6 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x25: apic 1 int 22
(irq 10)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x14 at pci6 dev 9 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x14 at pci6 dev 9 function 3 not configured
"Ricoh 5C852 xD" rev 0x14 at pci6 dev 9 function 4 not configured
cbb0 at pci6 dev 9 function 5 "Ricoh 5C476 CardBus" rev 0xbb: apic 1 int 22
(irq 10)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 135 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 21
(irq 10), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72322, FCDO> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T50L, SC04> ATAPI 5/cdrom
removable
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
"RICOH, Bay8Controller" (manufacturer 0x0, product 0x0) at pcmcia0 function 0
not configured
copy objref: 5b12 \\_PR_.CPU0._PSS
copy objref: 5b12 \\_PR_.CPU0._PPC
copy objref: 5b12 \\_PR_.CPU0._PSS
copy objref: 5b12 \\_PR_.CPU0._PPC
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. CKA7216" rev 2.00/32.18 addr 2
video0 at uvideo0
ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
scsibus2 at softraid0: 1 targets
sd1 at scsibus2 targ 0 lun 0: <OPENBSD, SR CRYPTO, 003> SCSI2 0/direct fixed
sd1: 161450MB, 512 bytes/sec, 330649751 sec total
