-------- Original-Nachricht -------- > Datum: Mon, 15 Mar 2010 07:58:42 +0100 > Von: Timo Schoeler <timo.schoe...@riscworks.net> > An: misc@openbsd.org > CC: silvershadow...@gmx.de > Betreff: Re: VLAN across two (or more) different vlandevs?
> > On 2010-03-12, silvershadow...@gmx.de <silvershadow...@gmx.de> wrote: > >> Simply put, I need vlan 123 on both vr0 and vr2 (the Alix I use has > >> three NICs, vr0 to vr2). > > > > the vlan device names (vlan123) do NOT need to be the same as the vlan > ID. > > > > e.g.: > > > > hostname.vlan123 > >> inet 10.11.0.3 255.255.255.0 NONE vlan 123 vlandev vr0 > > > > hostname.vlan1230 > >> inet 222.111.222.111 255.255.255.0 NONE vlan 123 vlandev vr2 > > > > if this isn't what you want, describe in more detail what you're > > trying to do. > > Hi, > > maybe you already tried this, but named the files like this: > > /etc/hostname.vlan0123 (vlan 123, vr0) > > and > > /etc/hostname.vlan2123 (vlan 123, vr2) > > ? > > I ran into a similar phenomenon quite a while ago. After renaming the > files so that '0' was not the first digit (e.g. .vlan1230 and .vlan1232, > respectively), it worked as supposed. > > HTH, > > Timo Hi! Wow, thanks, that was exactly the problem I had! After renaming it so that there's no 'zero' as the first number of the VLAN naming scheme, it works flawlessly. However, AFAICS, the name of the file should be meaningless, shouldn't it? So, is that a 'bug', or intended behaviour? Thanks again! Donald -- GMX DSL: Internet, Telefon und Entertainment f|r nur 19,99 EUR/mtl.! http://portal.gmx.net/de/go/dsl02
