It's "brand new".
On Tue, Feb 23, 2010 at 10:31:20AM -0600, Andres Salazar wrote:
> Why would that be , Marco? What special about this hardware?
>
> On Tue, Feb 23, 2010 at 10:15 AM, Marco Peereboom <sl...@peereboom.us> wrote:
> > You need -current to have a fighting chance with that server.
> >
> > On Tue, Feb 23, 2010 at 09:10:45AM -0600, Andres Salazar wrote:
> >> Hello,
> >>
> >> I have 2 SATA drives without an additional SATA controller on this
> >> box. I have tried this in ATA Mode, and also in AHCI mode. Disk reads
> >> are 50% higher. ?Userland compilation takes 55min when the usual on
> >> other similar hardware is 35 min.
> >>
> >> Could somebody check my dmesg and comment? It brings to my attention
> >> an error about the clock speed of the processor. Iam running 4.6
> >> OpenBSD i386
> >>
> >> Please note that the kernel iam using is a stable kernel, i also tried
> >> with the release GENERIC.MP same result.
> >>
> >> OpenBSD 4.6-stable (GENERIC-13-12-09.MP) #0: Tue Feb 23 08:52:54 CST 2010
> >> ? ? r...@odeon.my.domain:/usr/src/sys/arch/i386/compile/GENERIC-13-12-09.MP
> >> cpu0: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80
> >> GHz
> >> cpu0:
> >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> >> real mem ?= 3210936320 (3062MB)
> >> avail mem = 3110584320 (2966MB)
> >> mainbus0 at root
> >> bios0 at mainbus0: AT/286+ BIOS, date 09/11/09, BIOS32 rev. 0 @
> >> 0xfa0a0, SMBIOS rev. 2.6 @ 0xbf79c000 (62 entries)
> >> bios0: vendor Dell Inc. version "1.0.4" date 09/11/2009
> >> bios0: Dell Inc. PowerEdge R210
> >> acpi0 at bios0: rev 2
> >> acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST
> >> BERT EINJ TCPA SSDT
> >> acpi0: wakeup devices PCI0(S5) USBA(S0) USBB(S0)
> >> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> >> cpu0 at mainbus0: apid 0 (boot processor)
> >> cpu0: unknown i686 model 0x1e, can't get bus clock (0x0)
> >> cpu0: apic clock running at 132MHz
> >> cpu1 at mainbus0: apid 2 (application processor)
> >> cpu1: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80
> >> GHz
> >> cpu1:
> >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> >> cpu2 at mainbus0: apid 4 (application processor)
> >> cpu2: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80
> >> GHz
> >> cpu2:
> >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> >> cpu3 at mainbus0: apid 6 (application processor)
> >> cpu3: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80
> >> GHz
> >> cpu3:
> >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> >> cpu4 at mainbus0: apid 1 (application processor)
> >> cpu4: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80
> >> GHz
> >> cpu4:
> >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> >> cpu5 at mainbus0: apid 3 (application processor)
> >> cpu5: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80
> >> GHz
> >> cpu5:
> >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> >> cpu6 at mainbus0: apid 5 (application processor)
> >> cpu6: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80
> >> GHz
> >> cpu6:
> >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> >> cpu7 at mainbus0: apid 7 (application processor)
> >> cpu7: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80
> >> GHz
> >> cpu7:
> >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> >> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
> >> acpihpet0 at acpi0: 14318179 Hz
> >> acpiprt0 at acpi0: bus 0 (PCI0)
> >> acpiprt1 at acpi0: bus 1 (LYD0)
> >> acpiprt2 at acpi0: bus -1 (LYD2)
> >> acpiprt3 at acpi0: bus 2 (PEX0)
> >> acpiprt4 at acpi0: bus -1 (PEX4)
> >> acpiprt5 at acpi0: bus -1 (PEX5)
> >> acpiprt6 at acpi0: bus 3 (COMP)
> >> acpicpu0 at acpi0: C3, C2, C1
> >> acpicpu1 at acpi0: C3, C2, C1
> >> acpicpu2 at acpi0: C3, C2, C1
> >> acpicpu3 at acpi0: C3, C2, C1
> >> acpicpu4 at acpi0: C3, C2, C1
> >> acpicpu5 at acpi0: C3, C2, C1
> >> acpicpu6 at acpi0: C3, C2, C1
> >> acpicpu7 at acpi0: C3, C2, C1
> >> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x2200
> >> 0xec000/0x4000!
> >> ipmi at mainbus0 not configured
> >> cpu0: EST: unknown system bus clock
> >> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> >> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0xd130 rev
> >> 0x11
> >> ppb0 at pci0 dev 3 function 0 vendor "Intel", unknown product 0xd138
> >> rev 0x11: apic 0 int 16 (irq 0)
> >> pci1 at ppb0 bus 1
> >> vendor "Intel", unknown product 0xd155 (class system subclass
> >> miscellaneous, rev 0x11) at pci0 dev 8 function 0 not configured
> >> vendor "Intel", unknown product 0xd156 (class system subclass
> >> miscellaneous, rev 0x11) at pci0 dev 8 function 1 not configured
> >> vendor "Intel", unknown product 0xd157 (class system subclass
> >> miscellaneous, rev 0x11) at pci0 dev 8 function 2 not configured
> >> vendor "Intel", unknown product 0xd158 (class system subclass
> >> miscellaneous, rev 0x11) at pci0 dev 8 function 3 not configured
> >> vendor "Intel", unknown product 0xd150 (class system subclass
> >> miscellaneous, rev 0x11) at pci0 dev 16 function 0 not configured
> >> vendor "Intel", unknown product 0xd151 (class system subclass
> >> miscellaneous, rev 0x11) at pci0 dev 16 function 1 not configured
> >> ehci0 at pci0 dev 26 function 0 vendor "Intel", unknown product 0x3b3c
> >> rev 0x05: apic 0 int 22 (irq 14)
> >> usb0 at ehci0: USB revision 2.0
> >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> >> ppb1 at pci0 dev 28 function 0 vendor "Intel", unknown product 0x3b42 rev
> >> 0x05
> >> pci2 at ppb1 bus 2
> >> bnx0 at pci2 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 0 int
> >> 16 (irq 15)
> >> bnx1 at pci2 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 0 int
> >> 17 (irq 10)
> >> ehci1 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x3b34
> >> rev 0x05: apic 0 int 22 (irq 14)
> >> usb1 at ehci1: USB revision 2.0
> >> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> >> ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
> >> pci3 at ppb2 bus 3
> >> vga1 at pci3 dev 3 function 0 vendor "Matrox", unknown product 0x0532 rev
> >> 0x0a
> >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >> pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x3b14 rev
> >> 0x05
> >> pciide0 at pci0 dev 31 function 2 vendor "Intel", unknown product
> >> 0x3b20 rev 0x05: DMA (unsupported), channel 0 configured to
> >> native-PCI, channel 1 configured to native-PCI
> >> pciide0: using apic 0 int 20 (irq 11) for native-PCI interrupt
> >> wd0 at pciide0 channel 0 drive 0: <ST3250310NS>
> >> wd0: 16-sector PIO, LBA48, 238418MB, 488281250 sectors
> >> wd1 at pciide0 channel 1 drive 0: <ST3250310NS>
> >> wd1: 16-sector PIO, LBA48, 238418MB, 488281250 sectors
> >> pciide1 at pci0 dev 31 function 5 vendor "Intel", unknown product
> >> 0x3b26 rev 0x05: DMA (unsupported), channel 0 wired to native-PCI,
> >> channel 1 wired to native-PCI
> >> pciide1: using apic 0 int 21 (irq 15) for native-PCI interrupt
> >> pciide1: channel 0 ignored (not responding; disabled or no drives?)
> >> pciide1: channel 1 ignored (not responding; disabled or no drives?)
> >> isa0 at pcib0
> >> isadma0 at isa0
> >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> >> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> >> pckbc0 at isa0 port 0x60/5
> >> kbc: cmd word write error
> >> pcppi0 at isa0 port 0x61
> >> midi0 at pcppi0: <PC speaker>
> >> spkr0 at pcppi0
> >> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> >> mtrr: Pentium Pro MTRR support
> >> uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0020" rev 2.00/0.00 addr 2
> >> uhub3 at uhub1 port 1 "vendor 0x8087 product 0x0020" rev 2.00/0.00 addr 2
> >> uhidev0 at uhub3 port 2 configuration 1 interface 0 "RealVNC Mouse,
> >> Keyboard & Mass Storage" rev 2.00/1.01 addr 3
> >> uhidev0: iclass 3/1
> >> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> >> wskbd0 at ukbd0 mux 1
> >> wskbd0: connecting to wsdisplay0
> >> uhidev1 at uhub3 port 2 configuration 1 interface 1 "RealVNC Mouse,
> >> Keyboard & Mass Storage" rev 2.00/1.01 addr 3
> >> uhidev1: iclass 3/1
> >> ums0 at uhidev1: 3 buttons, Z dir
> >> wsmouse0 at ums0 mux 0
> >> uhidev2 at uhub3 port 2 configuration 1 interface 2 "RealVNC Mouse,
> >> Keyboard & Mass Storage" rev 2.00/1.01 addr 3
> >> uhidev2: iclass 3/1
> >> ums1 at uhidev2
> >> ums1: X report 0x0002 not supported
> >> uhub4 at uhub3 port 5 "Standard Microsystems product 0x2514" rev
> >> 2.00/0.00 addr 4
> >> umass0 at uhub4 port 2 configuration 1 interface 0 "TSSTcorp USB Mass
> >> Storage Device" rev 2.00/6.14 addr 5
> >> umass0: using ATAPI over Bulk-Only
> >> scsibus0 at umass0: 2 targets, initiator 0
> >> cd0 at scsibus0 targ 1 lun 0: <TSSTcorp, CDDVDW SE-S084C, TS00> ATAPI
> >> 5/cdrom removable
> >> softraid0 at root
> >> root on wd0a swap on wd0b dump on wd0b
> >> cpu4: unknown i686 model 0x1e, can't get bus clock (0x0)
> >> cpu1: unknown i686 model 0x1e, can't get bus clock (0x0)
> >> cpu5: unknown i686 model 0x1e, can't get bus clock (0x0)
> >> cpu2: unknown i686 model 0x1e, can't get bus clock (0x0)
> >> cpu6: unknown i686 model 0x1e, can't get bus clock (0x0)
> >> cpu3: unknown i686 model 0x1e, can't get bus clock (0x0)
> >> cpu7: unknown i686 model 0x1e, can't get bus clock (0x0)
> >> bnx0: address 00:24:e8:43:00:7d
> >> brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> >> bnx1: address 00:24:e8:43:00:7e
> >> brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
