Hello,
I have 2 SATA drives without an additional SATA controller on this
box. I have tried this in ATA Mode, and also in AHCI mode. Disk reads
are 50% higher. Userland compilation takes 55min when the usual on
other similar hardware is 35 min.
Could somebody check my dmesg and comment? It brings to my attention
an error about the clock speed of the processor. Iam running 4.6
OpenBSD i386
Please note that the kernel iam using is a stable kernel, i also tried
with the release GENERIC.MP same result.
OpenBSD 4.6-stable (GENERIC-13-12-09.MP) #0: Tue Feb 23 08:52:54 CST 2010
r...@odeon.my.domain:/usr/src/sys/arch/i386/compile/GENERIC-13-12-09.MP
cpu0: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem = 3210936320 (3062MB)
avail mem = 3110584320 (2966MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/11/09, BIOS32 rev. 0 @
0xfa0a0, SMBIOS rev. 2.6 @ 0xbf79c000 (62 entries)
bios0: vendor Dell Inc. version "1.0.4" date 09/11/2009
bios0: Dell Inc. PowerEdge R210
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST
BERT EINJ TCPA SSDT
acpi0: wakeup devices PCI0(S5) USBA(S0) USBB(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: unknown i686 model 0x1e, can't get bus clock (0x0)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu4:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu5:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu6:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Xeon(R) CPU X3460 @ 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu7:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (LYD0)
acpiprt2 at acpi0: bus -1 (LYD2)
acpiprt3 at acpi0: bus 2 (PEX0)
acpiprt4 at acpi0: bus -1 (PEX4)
acpiprt5 at acpi0: bus -1 (PEX5)
acpiprt6 at acpi0: bus 3 (COMP)
acpicpu0 at acpi0: C3, C2, C1
acpicpu1 at acpi0: C3, C2, C1
acpicpu2 at acpi0: C3, C2, C1
acpicpu3 at acpi0: C3, C2, C1
acpicpu4 at acpi0: C3, C2, C1
acpicpu5 at acpi0: C3, C2, C1
acpicpu6 at acpi0: C3, C2, C1
acpicpu7 at acpi0: C3, C2, C1
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x2200 0xec000/0x4000!
ipmi at mainbus0 not configured
cpu0: EST: unknown system bus clock
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0xd130 rev 0x11
ppb0 at pci0 dev 3 function 0 vendor "Intel", unknown product 0xd138
rev 0x11: apic 0 int 16 (irq 0)
pci1 at ppb0 bus 1
vendor "Intel", unknown product 0xd155 (class system subclass
miscellaneous, rev 0x11) at pci0 dev 8 function 0 not configured
vendor "Intel", unknown product 0xd156 (class system subclass
miscellaneous, rev 0x11) at pci0 dev 8 function 1 not configured
vendor "Intel", unknown product 0xd157 (class system subclass
miscellaneous, rev 0x11) at pci0 dev 8 function 2 not configured
vendor "Intel", unknown product 0xd158 (class system subclass
miscellaneous, rev 0x11) at pci0 dev 8 function 3 not configured
vendor "Intel", unknown product 0xd150 (class system subclass
miscellaneous, rev 0x11) at pci0 dev 16 function 0 not configured
vendor "Intel", unknown product 0xd151 (class system subclass
miscellaneous, rev 0x11) at pci0 dev 16 function 1 not configured
ehci0 at pci0 dev 26 function 0 vendor "Intel", unknown product 0x3b3c
rev 0x05: apic 0 int 22 (irq 14)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 vendor "Intel", unknown product 0x3b42 rev 0x05
pci2 at ppb1 bus 2
bnx0 at pci2 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 0 int
16 (irq 15)
bnx1 at pci2 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 0 int
17 (irq 10)
ehci1 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x3b34
rev 0x05: apic 0 int 22 (irq 14)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci3 at ppb2 bus 3
vga1 at pci3 dev 3 function 0 vendor "Matrox", unknown product 0x0532 rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x3b14 rev 0x05
pciide0 at pci0 dev 31 function 2 vendor "Intel", unknown product
0x3b20 rev 0x05: DMA (unsupported), channel 0 configured to
native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 20 (irq 11) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3250310NS>
wd0: 16-sector PIO, LBA48, 238418MB, 488281250 sectors
wd1 at pciide0 channel 1 drive 0: <ST3250310NS>
wd1: 16-sector PIO, LBA48, 238418MB, 488281250 sectors
pciide1 at pci0 dev 31 function 5 vendor "Intel", unknown product
0x3b26 rev 0x05: DMA (unsupported), channel 0 wired to native-PCI,
channel 1 wired to native-PCI
pciide1: using apic 0 int 21 (irq 15) for native-PCI interrupt
pciide1: channel 0 ignored (not responding; disabled or no drives?)
pciide1: channel 1 ignored (not responding; disabled or no drives?)
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
kbc: cmd word write error
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0020" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 "vendor 0x8087 product 0x0020" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 2 configuration 1 interface 0 "RealVNC Mouse,
Keyboard & Mass Storage" rev 2.00/1.01 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1 "RealVNC Mouse,
Keyboard & Mass Storage" rev 2.00/1.01 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub3 port 2 configuration 1 interface 2 "RealVNC Mouse,
Keyboard & Mass Storage" rev 2.00/1.01 addr 3
uhidev2: iclass 3/1
ums1 at uhidev2
ums1: X report 0x0002 not supported
uhub4 at uhub3 port 5 "Standard Microsystems product 0x2514" rev
2.00/0.00 addr 4
umass0 at uhub4 port 2 configuration 1 interface 0 "TSSTcorp USB Mass
Storage Device" rev 2.00/6.14 addr 5
umass0: using ATAPI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
cd0 at scsibus0 targ 1 lun 0: <TSSTcorp, CDDVDW SE-S084C, TS00> ATAPI
5/cdrom removable
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
cpu4: unknown i686 model 0x1e, can't get bus clock (0x0)
cpu1: unknown i686 model 0x1e, can't get bus clock (0x0)
cpu5: unknown i686 model 0x1e, can't get bus clock (0x0)
cpu2: unknown i686 model 0x1e, can't get bus clock (0x0)
cpu6: unknown i686 model 0x1e, can't get bus clock (0x0)
cpu3: unknown i686 model 0x1e, can't get bus clock (0x0)
cpu7: unknown i686 model 0x1e, can't get bus clock (0x0)
bnx0: address 00:24:e8:43:00:7d
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 00:24:e8:43:00:7e
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
