did you "net.inet.ip.forwarding=1" in sysctl? regards karl-heinz
On 14.01.2010, at 16:10, PsYkHe wrote: > I'm in troubles to put a router/firewall Openbsd 4.6 at vmware and at > Slackware 13 to can "talk" throught of host-only. But the main problem now is > the OpenBSD make a rdr to webserver Slackware. Well, I'll try descrive the > situation: > > > > The OpenBSD 4.6 has two interfaces: > > > > One bridge > > One host-only with ip 192.168.38.130 > > > > At Slackware 13 has a interface: > > host-only with ip 192.168.38.128 > > > > That are my rules of pf: > > > > if_net="vic0" > > if_ws="vic1" > > ip_ws="192.168.138.128" > > > > #black log all > > pass log all > > > > rdr pass log on $if_net proto tcp to port 6060 -> $ip_ws port 80 > > > > rdr pass log on $if_net proto tcp to port 2222 -> 127.0.0.1 port 22 > > > > nat log on $if_net from !($if_net) -> ($if_net:0) > > > > PS: Which if_net is the interface of the bridge and if_wa is the host-only. > > > > The OpenBSD can ping the internal ip of host-only of Slackware 192.168.138.128 > and also when I sent a telnet to him in port 80 and it answer perfectly. > > > > Therefore when it comes outside of the internet, a telnet to OpenBSD in port > 2222 it come in the ssh of OpenBSD but It cant log on. To port 6060 didn't > show up the log and it cant do a rdr or it didn't work. I've thought the > communication Slackware, the listen port 80 that was tcp6, maybe would be ipv6 > only, but I did insert tcp to ipv4 and the rdr also didn't work. > > > > I'm using the command: tcpdump -n -e -ttt -i pflog0 > > To verify these logs by interface pflog0 > > > > I'm needing a light, suggestion or something like that..Can you tell me > something guys? > > > > Any information or anything else you can ask me that Ill send. > > > > Thanks a lot. > > See ya.
