I'm in troubles to put a router/firewall Openbsd 4.6 at vmware and at Slackware 13 to can "talk" throught of host-only. But the main problem now is the OpenBSD make a rdr to webserver Slackware. Well, I'll try descrive the situation:
The OpenBSD 4.6 has two interfaces: One bridge One host-only with ip 192.168.38.130 At Slackware 13 has a interface: host-only with ip 192.168.38.128 That are my rules of pf: if_net="vic0" if_ws="vic1" ip_ws="192.168.138.128" #black log all pass log all rdr pass log on $if_net proto tcp to port 6060 -> $ip_ws port 80 rdr pass log on $if_net proto tcp to port 2222 -> 127.0.0.1 port 22 nat log on $if_net from !($if_net) -> ($if_net:0) PS: Which if_net is the interface of the bridge and if_wa is the host-only. The OpenBSD can ping the internal ip of host-only of Slackware 192.168.138.128 and also when I sent a telnet to him in port 80 and it answer perfectly. Therefore when it comes outside of the internet, a telnet to OpenBSD in port 2222 it come in the ssh of OpenBSD but It cant log on. To port 6060 didn't show up the log and it cant do a rdr or it didn't work. I've thought the communication Slackware, the listen port 80 that was tcp6, maybe would be ipv6 only, but I did insert tcp to ipv4 and the rdr also didn't work. I'm using the command: tcpdump -n -e -ttt -i pflog0 To verify these logs by interface pflog0 I'm needing a light, suggestion or something like that..Can you tell me something guys? Any information or anything else you can ask me that Ill send. Thanks a lot. See ya.
