cdrecord burns CDs perfectly, just it can't burn DVDs at all.
OpenBSD 4.6 (GENERIC.MP) #89: Thu Jul 9 21:32:39 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error
f7<clock_battery,ROM_cksum,config_unit,memory_size,invalid_time>
cpu0: Intel(R) Core(TM)2 Duo CPU P7550 @ 2.26GHz ("GenuineIntel" 686-class)
2.26 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,\
PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2926321664 (2790MB)
avail mem = 2830348288 (2699MB)
RTC BIOS diagnostic error
f7<clock_battery,ROM_cksum,config_unit,memory_size,invalid_time>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/29/05, SMBIOS rev. 2.4 @ 0xe0000 (42
entries)
bios0: vendor Apple Inc. version "MBP55.88Z.00AC.B03.0906151708" date 06/15/09
bios0: Apple Inc. MacBookPro5,5
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT
acpi0: wakeup devices ADP1(S3) LID0(S3) EC__(S3) OHC1(S3) EHC1(S3) OHC2(S3)
EHC2(S3) GIGE(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 25000000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU P7550 @ 2.26GHz ("GenuineIntel" 686-class)
2.26 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,\
PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (IXVE)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "3545797981023400290" type 3545797981528607052
oem "3545797981528673619"
bios0: ROM list: 0xc0000/0xe800
cpu0: Enhanced SpeedStep 2256 MHz: speeds: 2261, 2128, 1862, 1596, 798 MHz
memory map conflict 0xffc00000/0x400000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
mem address conflict 0xd3400000/0x80000
pchb0 at pci0 dev 0 function 0 "NVIDIA MCP79 Host" rev 0xb1
"NVIDIA MCP79 Memory" rev 0xb1 at pci0 dev 0 function 1 not configured
pcib0 at pci0 dev 3 function 0 "NVIDIA MCP79 ISA" rev 0xb3
"NVIDIA MCP79 Memory" rev 0xb1 at pci0 dev 3 function 1 not configured
nviic0 at pci0 dev 3 function 2 "NVIDIA MCP79 SMBus" rev 0xb1
iic0 at nviic0
iic0: addr 0x18 00=00 01=00 02=00 03=00 04=00 05=c3 06=10 07=00 08=00 09=00
0a=00 0b=00 0c=00 words 00=002f 01=0000 02=0000 03=0000 04=0000 05=c394 06=104a
07=0001
iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=c3 06=10 07=00 08=00 09=00
0a=00 0b=00 0c=00 words 00=002f 01=0000 02=0000 03=0000 04=0000 05=c394 06=104a
07=0001
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM with thermal sensor
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-8500 SO-DIMM with thermal sensor
iic1 at nviic0
iic1: addr 0x2c 00=ff 02=08 03=f9 07=60 0d=74 71=06 86=47 90=71 91=61 92=a4
93=79 94=31 95=3c 96=7c 97=92 9f=0c a0=3d a1=3d a2=3d a3=3d a4=3d a5=3d a6=3d
a7=3d a8=3d a
9=3d aa=3d ab=3d ac=3d ad=3d ae=3d af=3d b0=7d b1=7d b2=3d b3=3d b4=3d b5=3d
b6=3d b7=3d b8=3d b9=3d ba=3d bb=3d bc=3d bd=3d be=3d bf=3d words 00=ff00
01=0008 02=08f9
03=f900 04=0000 05=0000 06=0060 07=6000
"NVIDIA MCP79 Memory" rev 0xb1 at pci0 dev 3 function 3 not configured
vendor "NVIDIA", unknown product 0x0a98 (class memory subclass RAM, rev 0xb1)
at pci0 dev 3 function 4 not configured
"NVIDIA MCP79 Co-processor" rev 0xb1 at pci0 dev 3 function 5 not configured
ohci0 at pci0 dev 4 function 0 "NVIDIA MCP79 USB" rev 0xb1: apic 1 int 11 (irq
11), version 1.0, legacy support
ehci0 at pci0 dev 4 function 1 "NVIDIA MCP79 USB" rev 0xb1: apic 1 int 10 (irq
10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 6 function 0 "NVIDIA MCP79 USB" rev 0xb1: apic 1 int 7 (irq
7), version 1.0, legacy support
ehci1 at pci0 dev 6 function 1 "NVIDIA MCP79 USB" rev 0xb1: apic 1 int 5 (irq 5)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 8 function 0 "NVIDIA MCP79 HD Audio" rev 0xb1: apic 1 int
15 (irq 15)
azalia0: codecs: Cirrus Logic/0x4206
audio0 at azalia0
ppb0 at pci0 dev 9 function 0 "NVIDIA MCP79 PCIE" rev 0xb1
pci1 at ppb0 bus 1
nfe0 at pci0 dev 10 function 0 "NVIDIA MCP79 LAN" rev 0xb1: apic 1 int 14 (irq
14), address 00:26:b0:da:a3:86
rgephy0 at nfe0 phy 1: RTL8169S/8110S PHY, rev. 2
pciide0 at pci0 dev 11 function 0 "NVIDIA MCP79 SATA" rev 0xb1: DMA
pciide0: using apic 1 int 11 (irq 11) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <FUJITSU MJA2160BH FFS G1>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRW GS23N, SB00> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
ppb1 at pci0 dev 16 function 0 "NVIDIA MCP79 PCIE" rev 0xb1
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 vendor "NVIDIA", unknown product 0x0863 rev 0xb1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb2 at pci0 dev 21 function 0 "NVIDIA MCP79 PCIE" rev 0xb1: apic 1 int 10 (irq
255)
pci3 at ppb2 bus 3
"Broadcom BCM4322" rev 0x01 at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 22 function 0 "NVIDIA MCP79 PCIE" rev 0xb1: apic 1 int 7 (irq
255)
pci4 at ppb3 bus 4
vendor "AT&T/Lucent", unknown product 0x5901 (class serial bus subclass
Firewire, rev 0x07) at pci4 dev 0 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Apple Inc. Built-in
iSight" rev 2.00/4.19 addr 2
video0 at uvideo0
umass0 at uhub1 port 5 configuration 1 interface 0 "Apple Card Reader" rev
2.00/98.33 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <APPLE, SD Card Reader, 1.00> SCSI0 0/direct
removable
sd0: drive offline
uhub4 at uhub3 port 1 "Apple Inc. BRCM2046 Hub" rev 2.00/1.00 addr 2
uhidev0 at uhub2 port 5 configuration 1 interface 0 "Apple Computer, Inc. IR
Receiver" rev 2.00/0.16 addr 2
uhidev0: iclass 3/0, 38 report ids
uhid0 at uhidev0 reportid 36: input=4, output=0, feature=0
uhid1 at uhidev0 reportid 37: input=4, output=0, feature=0
uhid2 at uhidev0 reportid 38: input=4, output=0, feature=0
ubt0 at uhub4 port 1 "Apple Inc. Bluetooth USB Host Controller" rev 2.00/1.80
addr 3
uhidev1 at uhub2 port 6 configuration 1 interface 0 "Apple Inc. Apple Internal
Keyboard / Trackpad" rev 2.00/0.81 addr 3
uhidev1: iclass 3/1, 9 report ids
ukbd0 at uhidev1 reportid 1: 8 modifier keys, 6 key codes, country code 33
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhid3 at uhidev1 reportid 9: input=0, output=0, feature=3
uhidev2 at uhub2 port 6 configuration 1 interface 1 "Apple Inc. Apple Internal
Keyboard / Trackpad" rev 2.00/0.81 addr 3
uhidev2: iclass 3/0, 68 report ids
uhid4 at uhidev2 reportid 68: input=511, output=0, feature=0
uhidev3 at uhub2 port 6 configuration 1 interface 2 "Apple Inc. Apple Internal
Keyboard / Trackpad" rev 2.00/0.81 addr 3
uhidev3: iclass 3/1, 2 report ids
ums0 at uhidev3 reportid 2: 3 buttons
wsmouse0 at ums0 mux 0
uhidev4 at uhub4 port 2 configuration 1 interface 0 "Apple Computer product
0x820a" rev 2.00/1.00 addr 4
uhidev4: iclass 3/1, 1 report id
ukbd1 at uhidev4 reportid 1: 8 modifier keys, 6 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev5 at uhub4 port 3 configuration 1 interface 0 "Apple Computer product
0x820b" rev 2.00/1.00 addr 5
uhidev5: iclass 3/1, 2 report ids
ums1 at uhidev5 reportid 2: 3 buttons
wsmouse1 at ums1 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
SENSE KEY: Media Error
COMMAND INFO: 0x3e
ASC/ASCQ: Unrecovered Read Error
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
SENSE KEY: Media Error
COMMAND INFO: 0x3e
ASC/ASCQ: Unrecovered Read Error
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
SENSE KEY: Media Error
COMMAND INFO: 0x3e
ASC/ASCQ: Unrecovered Read Error
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
SENSE KEY: Media Error
COMMAND INFO: 0x3e
ASC/ASCQ: Unrecovered Read Error
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
SENSE KEY: Media Error
COMMAND INFO: 0x3e
ASC/ASCQ: Unrecovered Read Error
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
SENSE KEY: Media Error
COMMAND INFO: 0x3107033e
ASC/ASCQ: No Seek Complete
--- On Wed, 12/23/09, Nick Guenther <kou...@gmail.com> wrote:
> From: Nick Guenther <kou...@gmail.com>
> Subject: Re: DVD burning software besides cdrecord/growisofs
> To: misc@openbsd.org
> Date: Wednesday, December 23, 2009, 3:58 AM
> On Tue, Dec 22, 2009 at 10:19 PM,
> James Hozier <guitars...@yahoo.com>
> wrote:
> > Okay, so cdrecord I got from pkg_add with 4.6-release
> cannot even
> > burn DVDs at all. growisofs refuses to burn my DVD
> with the error:
> >
> > more than 50% of space will be *wasted*!
> > use a single-layer media for this.
> >
> > And there's no option to force the burn.
> >
> > What other command-line options are there? (I'm having
> trouble
> > getting X to work.)
> >
> >
>
> dmesg? if cdrecord can't do it nothing else can--cdrecord
> is the
> backend for most other things, and even when it's not.. the
> cdrecord
> people have made CD burning their entire life.
