Hello list,
I`m kind of new and i haven`t to this list, so please excuse me if I have
misrouted my question.
The issue is that OpenBSD 4.6-stable is not reading my bios thermal
outputs(cpu temperature is that i`m really interested in). I`ve read the man
pages about sysctl hw.sensors
and tried googling for information but nothing.
My set-up is:
OpenBSD 4.6-stable (GENERIC) #0: Wed Nov 25 16:39:25 EET 2009
cl...@sgate.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP ("AuthenticAMD" 686-class, 256KB L2 cache) 1.84 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 2683863040 (2559MB)
avail mem = 2591637504 (2471MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/04/04, BIOS32 rev. 0 @ 0xfb470,
SMBIOS rev. 2.2 @ 0xf0000 (48 entries)
bios0: vendor Phoenix Technologies, LTD version "ASUS A7N8X2.0 ACPI BIOS Rev
1010" date 08/04/2004
bios0: ASUSTeK Computer INC. A7N8X2.0
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 5 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x1800 0xd2000/0x1800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xc1
agp at pchb0 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa4
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2
iic0 at nviic0
spdmem0 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC3200CL3.0
iic1 at nviic0
iic1: addr 0x49 00=1c 04=1c 11=00 12=4b 26=4b 2e=4b 33=50 3e=4b 42=4b 4b=50
4e=4b 58=1c 5c=1c 67=50 6a=4b 76=4b 78=1c 85=00 86=4b 87=50 9b=50 ab=50
b3=50 b8=1c c3=50 c7=50 d0=1c d4=1c dd=00 de=4b e2=4b ed=00 ee=4b f0=1c
fc=1c words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=4b00 07=5000
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa4: irq 11,
version 1.0, legacy support
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa4: irq 5, version
1.0, legacy support
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa4: irq 12
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 11, address
00:11:2f:54:1f:c6
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
auich0 at pci0 dev 6 function 0 "NVIDIA nForce2 AC97" rev 0xa1: irq 11,
nForce2 AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
fxp0 at pci1 dev 9 function 0 "Intel 8255x" rev 0x0c, i82550: irq 12,
address 00:0e:0c:51:87:86
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ExcelStor Technology J880>
wd0: 16-sector PIO, LBA48, 78532MB, 160834367 sectors
wd1 at pciide0 channel 0 drive 1: <Hitachi HDP725050GLAT80>
wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-H10N, JL10> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xc1
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "NVIDIA GeForce FX 5700LE" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
biomask ff65 netmask ff65 ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b**
And the output of sysctl hw.sensors is empty(I`m writing it as root). With
sysctl -n hw.sensors the output s the same.
Best regards!
**
