Hi all,
I'm having some issues regarding to automatically power down my
machine
after halting. I have tried to pass the -p option to both
/sbin/shutdown and /sbin/halt, but I didn't get success.
My rc.shutdown configuration file is as follows:
# /etc/rc.shutdown
#
powerdown=YES
And here is the output from dmesg:
OpenBSD 4.4 (GENERIC.MP) #1812: Tue Aug 12 17:22:53 MDT 2008
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/
GENERIC.MP
real mem = 2133815296 (2034MB)
avail mem = 2071953408 (1975MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf04d0 (57 entries)
bios0: vendor American Megatrends Inc. version "0301" date
06/09/2006
bios0: ASUSTeK Computer INC. P5GPL-X SE
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC OEMB MCFG
acpi0: wakeup devices P0P1(S4) P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4)
P0P7(S4) PS2K(S4) PS2M(S4) UAR1(S4) USB1(S4) USB2(S4) USB3(S4)
USB4(S4)
EUSB(S4) MC97(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz, 3011.01 MHz
cpu0:
FPU,
VME,
DE,
PSE,
TSC,
MSR,
PAE,
MCE,
CX8,
APIC,
SEP,
MTRR,
PGE,
MCA,
CMOV,
PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,EST,TM2,CNXT-ID,CX16,xTPR,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 238MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) 4 CPU 3.00GHz, 3582.69 MHz
cpu1:
FPU,
VME,
DE,
PSE,
TSC,
MSR,
PAE,
MCE,
CX8,
APIC,
SEP,
MTRR,
PGE,
MCA,
CMOV,
PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,EST,TM2,CNXT-ID,CX16,xTPR,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 1 (P0P3)
acpiprt3 at acpi0: bus 2 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 82915G Host" rev 0x0e
ppb0 at pci0 dev 1 function 0 "Intel 82915G PCIE" rev 0x0e: apic 2
int
16 (irq 10)
pci1 at ppb0 bus 3
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 GS" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: no integrated graphics
drm at vga1 unsupported
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04:
apic 2 int 16 (irq 10)
azalia0: codec[s]: Analog Devices/0x1986
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 2
int 16 (irq 10)
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 2
int 23 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 2
int 19 (irq 4)
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 2
int 18 (irq 5)
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 2
int 16 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 2
int 23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd4
pci3 at ppb2 bus 1
skc0 at pci3 dev 3 function 0 "Marvell Yukon 88E8001/8003/8010" rev
0x13, Yukon Lite (0x9): apic 2 int 19 (irq 4)
sk0 at skc0 port A: address 00:17:31:ab:cd:ef
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
vendor "Motorola", unknown product 0x3052 (class communications
subclass modem, rev 0x04) at pci3 dev 9 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x04
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA,
channel 0 configured to compatibility, channel 1 configured to
compati
bility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H55N, 1.01>
ATAPI
5/cdrom removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x04:
DMA,
channel 0 configured to native-PCI, channel 1 configured to native-
PC
I
pciide1: using apic 2 int 19 (irq 4) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3200820AS>
wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04:
apic
2 int 19 (irq 0)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC3200CL3.0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x63
lm1 at wbsio0 port 0x290/8: W83627EHF
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 5 configuration 1 interface 0 "Generic Mass
Storage Device" rev 2.00/1.26 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0
0/direct removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0
0/direct removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0
0/direct removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0
0/direct removable
sd3: drive offline
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Microsoft Basic
Optical Mouse" rev 1.10/0.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Any help would be appreciated.
Thanks in advance,
Shipp Douglas.
