Yeah, I have already tried the above command... unfortunately, as I had said before, it didn't work.
Sorry if I didn't make it clear in my previous message, but the commands that I have tested are as follows: # shutdown -h -p now and # halt -p On 10/12/09, Aioanei Rares <bsdlis...@gmail.com> wrote: > Shipp Douglas wrote: >> Hi all, >> >> I'm having some issues regarding to automatically power down my machine >> after halting. I have tried to pass the -p option to both >> /sbin/shutdown and /sbin/halt, but I didn't get success. >> >> My rc.shutdown configuration file is as follows: >> # /etc/rc.shutdown >> # >> powerdown=YES >> >> And here is the output from dmesg: >> >> OpenBSD 4.4 (GENERIC.MP) #1812: Tue Aug 12 17:22:53 MDT 2008 >> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> real mem = 2133815296 (2034MB) >> avail mem = 2071953408 (1975MB) >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf04d0 (57 entries) >> bios0: vendor American Megatrends Inc. version "0301" date 06/09/2006 >> bios0: ASUSTeK Computer INC. P5GPL-X SE >> acpi0 at bios0: rev 0 >> acpi0: tables DSDT FACP APIC OEMB MCFG >> acpi0: wakeup devices P0P1(S4) P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4) >> P0P7(S4) PS2K(S4) PS2M(S4) UAR1(S4) USB1(S4) USB2(S4) USB3(S4) >> USB4(S4) >> EUSB(S4) MC97(S4) SLPB(S4) >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz, 3011.01 MHz >> cpu0: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS- >> CPL,EST,TM2,CNXT-ID,CX16,xTPR,LONG >> cpu0: 2MB 64b/line 8-way L2 cache >> cpu0: apic clock running at 238MHz >> cpu1 at mainbus0: apid 1 (application processor) >> cpu1: Intel(R) Pentium(R) 4 CPU 3.00GHz, 3582.69 MHz >> cpu1: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS- >> CPL,EST,TM2,CNXT-ID,CX16,xTPR,LONG >> cpu1: 2MB 64b/line 8-way L2 cache >> ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus 3 (P0P1) >> acpiprt2 at acpi0: bus 1 (P0P3) >> acpiprt3 at acpi0: bus 2 (P0P4) >> acpiprt4 at acpi0: bus -1 (P0P6) >> acpiprt5 at acpi0: bus -1 (P0P7) >> acpicpu0 at acpi0 >> acpicpu1 at acpi0 >> acpibtn0 at acpi0: SLPB >> acpibtn1 at acpi0: PWRB >> pci0 at mainbus0 bus 0: configuration mode 1 >> pchb0 at pci0 dev 0 function 0 "Intel 82915G Host" rev 0x0e >> ppb0 at pci0 dev 1 function 0 "Intel 82915G PCIE" rev 0x0e: apic 2 int >> 16 (irq 10) >> pci1 at ppb0 bus 3 >> vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 GS" rev 0xa1 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> agp0 at vga1: no integrated graphics >> drm at vga1 unsupported >> azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: >> apic 2 int 16 (irq 10) >> azalia0: codec[s]: Analog Devices/0x1986 >> audio0 at azalia0 >> ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 2 >> int 16 (irq 10) >> pci2 at ppb1 bus 2 >> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 2 >> int 23 (irq 11) >> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 2 >> int 19 (irq 4) >> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 2 >> int 18 (irq 5) >> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 2 >> int 16 (irq 10) >> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 2 >> int 23 (irq 11) >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd4 >> pci3 at ppb2 bus 1 >> skc0 at pci3 dev 3 function 0 "Marvell Yukon 88E8001/8003/8010" rev >> 0x13, Yukon Lite (0x9): apic 2 int 19 (irq 4) >> sk0 at skc0 port A: address 00:17:31:ab:cd:ef >> eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 >> vendor "Motorola", unknown product 0x3052 (class communications >> subclass modem, rev 0x04) at pci3 dev 9 function 0 not configured >> pcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x04 >> pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA, >> channel 0 configured to compatibility, channel 1 configured to compati >> bility >> atapiscsi0 at pciide0 channel 0 drive 1 >> scsibus0 at atapiscsi0: 2 targets, initiator 7 >> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H55N, 1.01> ATAPI >> 5/cdrom removable >> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4 >> pciide0: channel 1 disabled (no drives) >> pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x04: DMA, >> channel 0 configured to native-PCI, channel 1 configured to native-PC >> I >> pciide1: using apic 2 int 19 (irq 4) for native-PCI interrupt >> wd0 at pciide1 channel 0 drive 0: <ST3200820AS> >> wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors >> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 >> ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic >> 2 int 19 (irq 0) >> iic0 at ichiic0 >> spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0 >> spdmem1 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC3200CL3.0 >> usb1 at uhci0: USB revision 1.0 >> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb2 at uhci1: USB revision 1.0 >> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb3 at uhci2: USB revision 1.0 >> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb4 at uhci3: USB revision 1.0 >> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> isa0 at pcib0 >> isadma0 at isa0 >> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo >> pckbc0 at isa0 port 0x60/5 >> pckbd0 at pckbc0 (kbd slot) >> pckbc0: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> pcppi0 at isa0 port 0x61 >> midi0 at pcppi0: <PC speaker> >> spkr0 at pcppi0 >> lpt0 at isa0 port 0x378/4 irq 7 >> wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x63 >> lm1 at wbsio0 port 0x290/8: W83627EHF >> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 >> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec >> mtrr: Pentium Pro MTRR support >> umass0 at uhub0 port 5 configuration 1 interface 0 "Generic Mass >> Storage Device" rev 2.00/1.26 addr 2 >> umass0: using SCSI over Bulk-Only >> scsibus1 at umass0: 2 targets, initiator 0 >> sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 >> 0/direct removable >> sd0: drive offline >> sd1 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 >> 0/direct removable >> sd1: drive offline >> sd2 at scsibus1 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 >> 0/direct removable >> sd2: drive offline >> sd3 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 >> 0/direct removable >> sd3: drive offline >> uhidev0 at uhub1 port 2 configuration 1 interface 0 "Microsoft Basic >> Optical Mouse" rev 1.10/0.00 addr 2 >> uhidev0: iclass 3/1 >> ums0 at uhidev0: 3 buttons, Z dir >> wsmouse0 at ums0 mux 0 >> softraid0 at root >> root on wd0a swap on wd0b dump on wd0b >> >> Any help would be appreciated. >> >> Thanks in advance, >> Shipp Douglas. >> >> >> > ...tried shutdown -hp now ?
