Howdy List?

I'm trying to setup spamd on a sparc and wondering
about using PF or the milter redirect mechanism. 

Are there any instruction on using these with sendmail
past the man pages?  I've set up spamd but am clearly
missing something as there's been no abatement of 
crap in my mailboxes ... also I'm getting an error
(faaakk sorry about the truncation)
spamlogd: Failed to initialize: pflog0: Device not configured
in /var/log/messages .

Any pointers would be appreciated...

Thanks,

Dhu

PS, FWIW, here's my dmesg:

console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2009 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.5 (GENERIC) #1898: Sat Feb 28 17:42:44 MST 2009
    dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 536870912 (512MB)
avail mem = 507494400 (483MB)
mainbus0 at root: Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 270MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 1.3) @ 270 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 
b/l)
psycho0 at mainbus0 addr 0xfffc4000: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-4, PCI bus 0
psycho0: dvma map c0000000-dfffffff
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 
72c000-72c003, 72f000-72f003
power0 at ebus0 addr 724000-724003 ivec 0x25
"SUNW,pll" at ebus0 addr 504000-504002 not configured
sab0 at ebus0 addr 400000-40007f ivec 0x2b: rev 3.2
sabtty0 at sab0 port 0
sabtty1 at sab0 port 1
comkbd0 at ebus0 addr 3083f8-3083ff ivec 0x29: layout 34
wskbd0 at comkbd0: console keyboard
com0 at ebus0 addr 3062f8-3062ff ivec 0x2a: mouse: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ivec 0x22: polled
"fdthree" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ivec 0x27 
not configured
clock1 at ebus0 addr 0-1fff: mk48t59
"flashprom" at ebus0 addr 0-fffff not configured
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 
722000-722003 ivec 0x23 ivec 0x24: nvaddrs 0
audio0 at audioce0
hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address 
08:00:20:a2:f6:94
nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1
vgafb0 at pci1 dev 2 function 0 "ATI Mach64" rev 0x5c
wsdisplay0 at vgafb0 mux 1: console (std, sun emulation), using wskbd0
pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA, 
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7e0 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC AC28400R>
wd0: 16-sector PIO, LBA, 8063MB, 16514064 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8322B, 1.03> ATAPI 5/cdrom 
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "DEC 21152 PCI-PCI" rev 0x02
pci3 at ppb2 bus 3
"Sun PCIO EBus2" rev 0x01 at pci3 dev 0 function 0 not configured
hme1 at pci3 dev 0 function 1 "Sun HME" rev 0x01: ivec 0x7d1, address 
08:00:20:a3:e8:52
nsphy1 at hme1 phy 1: DP83840 10/100 PHY, rev. 1
isp0 at pci3 dev 4 function 0 "QLogic ISP1020" rev 0x05: ivec 0x7d0
isp0: invalid NVRAM header
scsibus1 at isp0: 16 targets, initiator 7
ppb3 at pci2 dev 2 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci4 at ppb3 bus 4
"Sun PCIO EBus2" rev 0x01 at pci4 dev 0 function 0 not configured
hme2 at pci4 dev 0 function 1 "Sun HME" rev 0x01: ivec 0x7d5, address 
08:00:20:ab:02:fd
nsphy2 at hme2 phy 1: DP83840 10/100 PHY, rev. 1
isp1 at pci4 dev 4 function 0 "QLogic ISP1020" rev 0x05: ivec 0x7d4
isp1: invalid NVRAM header
scsibus2 at isp1: 16 targets, initiator 7
softraid0 at root
bootpath: /p...@1f,0/p...@1,1/i...@3,0/d...@0,0
root on wd0a swap on wd0b dump on wd0b

Reply via email to